Grassland Tillage Ploughs

SERVO 25

SERVO 35

SERVO 35 S

SERVO 45

SERVO 45 S

SERVO 6.50 Stubble cultivators Disc harrow Rotary harrows Drilling technology

New to the range What the Experts Say Downloads

Ploughs

SERVO 45

Equipped for the hardest endurance

Types

Technical data

	SERVO 45 - 4 furrow	SERVO 45 - 5 furrow (4+1)
Beam dimensions	140 x 140 mm	140 x 140 mm
Under beam clearance	80, 90 cm	80, 90 cm
Interbody distance	95 102 cm	95 102 cm
Leg dimensions	80 x 35 mm	80 x 35 mm
Body spacing and furrow widths	95 (30-35-40-45-50) 102 (32-38-43-48-54) cm	95 (30-35-40-45-50) 102 (32-38-43-48-54) cm
Weight	1196 kg	1494 kg

	SERVO 45 nova - 4 furrow	SERVO 45 nova - 5 furrow (4+1)
Beam dimensions	140 x 140 mm	140 x 140 mm
Under beam clearance	80, cm	80, cm
Interbody distance	95 102 cm	95 cm
Leg dimensions	80 x 35 mm	80 x 35 mm
Body spacing and furrow widths	95 (30-35-40-45-50) 102 (32-38-43-48-54) cm	95 (30-35-40-45-50) cm
Weight	1367 kg	1712 kg

	SERVO 45 plus - 3 furrow	SERVO 45 plus - 4 furrow	SERVO 45 plus - 5 furrow (4+1)
Beam dimensions	140 x 140 mm	140 x 140 mm	140 x 140 mm
Under beam clearance	80, 90 cm	80, 90 cm	80, 90 cm
Interbody distance	95 102 115 cm	95 102 cm	95 102 cm
Leg dimensions	80 x 35 mm	80 x 35 mm	80 x 35 mm
Body spacing and furrow widths	95 (23-49) 102 (25-54) 115 (28-60) cm	95 (23-49) 102 (25-54) cm	95 (23-49) 102 (25-54) cm
Weight	1077 kg	1348 kg	1610 kg

	SERVO 45 plus nova - 4 furrow	SERVO 45 plus nova - 5 furrow (4+1)
Beam dimensions	140 x 140 mm	140 x 140 mm
Under beam clearance	80, cm	80, cm
Interbody distance	95 cm	95 cm
Leg dimensions	80 x 35 mm	80 x 35 mm
Body spacing and furrow widths	95 (23-49) cm	95 (23-49) cm
Weight	1523 kg	1828 kg

Dimensions and weights are subject to change due to ongoing technical development, and vary from country to country.

Standard Equipment

SERVO 45

Mounting option	3 point linkage with cross shaft
Mounting category	Cat. III / Width 2
Solid mould boards	27 W 3L 36 W 36 UWc 39 UW 3L 41 W 46 Wc 46 Wd
Point type	Share with reversible chisel point 18''
Working width adjustment	Mechanical; 5-hole setting
Interbody distance	95 cm
Under beam clearance	80 cm
Hydraulic connection	1 x double-acting
Standard equipment includes	Tools Landside protection plate at last furrow

SERVO 45 nova

Mounting option	3 point linkage with cross shaft
Mounting category	Cat. III / Width 2
Solid mould boards	27 W 3L 36 W 36 UWc 39 UW 3L 41 W 46 Wc 46 Wd
Point type	Share with reversible chisel point 18''
Working width adjustment	Mechanical; 5-hole setting
Trip leg mechanism	Hydraulic NON-STOP overload protection
Interbody distance	95 cm
Under beam clearance	80 cm
Hydraulic connection	1 x double-acting 1 x single-acting
Standard equipment includes	Tools Landside protection plate at last furrow

SERVO 45 plus

Mounting option	3 point linkage with cross shaft
Mounting category	Cat. III / Width 2
Solid mould boards	27 W 3L 36 W 36 UWc 39 UW 3L 41 W 46 Wc 46 Wd
Point type	Share with reversible chisel point 18''
Working width adjustment	Hydraulic; stepless
Interbody distance	95 cm
Under beam clearance	80 cm
Hydraulic connection	2 x double-acting
Standard equipment includes	Tools Landside protection plate at last furrow

SERVO 45 plus nova

Mounting option	3 point linkage with cross shaft
Mounting category	Cat. III / Width 2
Solid mould boards	27 W 3L 36 W 36 UWc 39 UW 3L 41 W 46 Wc 46 Wd
Point type	Share with reversible chisel point 18''
Working width adjustment	Hydraulic; stepless
Trip leg mechanism	Hydraulic NON-STOP overload protection
Interbody distance	95 cm
Under beam clearance	80 cm
Hydraulic connection	2 x double-acting 1 x single-acting
Standard equipment includes	Tools Landside protection plate at last furrow

Technical highlights

SERVOMATIC setting system

The right setting:

Adjust front furrow width using the rear turnbuckle: If the front furrow width is too narrow, extend the turnbuckle. If it is too wide, shorten the turnbuckle.
Adjust the pulling point using the front turnbuckle: If the tractor pulls towards the ploughed field – extend the turnbuckle - lower links move towards the ploughed field. If the tractor pulls towards the unploughed field - shorten the turnbuckle - lower links move towards the unploughed field. The front furrow width does not change when the pulling point setting is changed.

SERVOMATIC control center for SERVO standard plouhgs

It’s unique

Front furrow width and pulling point are adjusted separately with ease and precision. The two functions do not influence each other; no need for corrective adjustment. A few simple adjustments and the plough is set correctly the first time.
The wide, infinitely variable range allows rapid setting for all conditions. Optimum pulling point adjustment guarantees low landside pressure, giving less wear and low fuel consumption.

Turnbuckles with antitwist locks allow easy, accurate plough setting.

SERVOMATIC control center for SERVO ploughs with Plus hydraulic furrow width adjustment

EXACT

Reversing unit with furrow-width adjustment
Fine adjustment gives unique, 100% basic adjustment to varying tractor lower linkage dimensions.
Made from tempered cast steel.

Turnbuckles
with antitwist locks

PLUS unique setting technology

SERVO Plus also enables the basic adjustment to be matched with precision to the various lower linkage dimensions of different tractors.
With furrow width adjustment - 100 % accuracy for first body furrow widt and 100 % accuracy for drag point - there is never any side traction.

Optimum match to ploughing requirements. Correct ratio from working width to working width - best match to tractor performance.
Wide winter furrow in dry soil saves time and fuel (up to 30 %) and reduces wear due to slow travel. Larger clods on the surface with good effect from frost.
Narrow seed furrow in heavy, moist soil. Minimises slipping and delivers a fine-crumbled seed furrow.

Best match for slopes: Narrow uphill, wide going down
Straightforward ploughing along the field edge
Optimum fenceline ploughing even with three furrows
Simply plough around obstructions
Tight corners are easier to plough and bent furrows can be straightened.

Variable adjustment
On the SERVO Plus system the forces on the adjustment mechanism are very low so that the furrow width can be adjusted during ploughing.

Hydraulic cylinder is fitted with check valve as standard, hoses not under pressure during ploughing
All coulters and skims are adjusted automatically

EXACT

Wear bushes
All bearings can be lubricated.
Critical bearings are fitted with wear-resistant, replaceable bushes.

Special lever system
Low adjusting force required due to long lever 1.
Protects the lever system and bearings.

Memory cylinder
is optional. One cylinder for 2 functions: Beam pivot system and furrow width adjustment. First of all the beam is pivoted and rotated - then it pivots back to its original setting again automatically. Simple, low maintenance.

NOVA trip leg system

Indirect triggering

The triggering pressure on this system is cleverly controlled: the leg does not trip until the set resistance has been reached. The pressure required to trigger the leg then goes down the higher the leg moves upwards. This protects the whole plough.
As the share penetrates the ground again the pressure increases, which is important on heavy, dry ground.
Each pair of plough bodies has its own hydraulic accumulator.

NOVA-unit for SERVO 25 to 65 Rides upwards and pivots to the side up to 40 cm. Lubricated bearings and additional shear bolts guarantee a long service life.	Hydraulic trip leg system The hydraulic NOVA system enables the plough to be adapted to different types of soil by adjusting the hydraulic triggering pressure.	Spring-mounted disc coulter This degree of movement allows the disc to roll over rocks without risk of damage.

RELIABLE

Centralised topping up
Standard feature from SERVO 35 onwards.
The triggering pressure can be adjusted quickly and easily from a central point.
Preload pressure can be read at pressure gauge.

Gas accumulator
is mounted on inside for protection. One accumulator for each body.

Ideal plough body shapes

Different soil conditions require different plough body shapes.
They have to be easy to pull, and deliver the best results.
A wide range of modern bodies provides the right shape for every type of soil. All bodies can be mounted on any SERVO plough.


	30 UWS slatted boards Small version For shallow ploughing Clean furrows Best possible crumbling properties
	35 WSS slatted boards proven a thousand times over many years low drag, specially suitable for heavy, sticky soil For working depths below 30 cm Especially wide furrows for use with wide tyres Excellent crumbling properties
	38 WWS slatted mould board NEW Plough body for medium to heavy soil: loam, clay, etc.
mould boards
	27 W mould board NEW Especially suitable for working on slopes. Plough body for shallow ploughing. Wide furrows.
	36 UW Universal body Very clean furrows Ploughs in high quantities of trash no problem Excellent crumbling properties Low drag, and suitable for almost all soil types
	36 W Long body Sleek and curved For soil with high quantities of loam and clay Best results on light soils too Extended body for high working speeds without casting up harvest trash
	39 UW Universal body Suitable for wide tractor tyre dimensions due to its especially wide furrow clearance For working depths up to 38 cm Excellent crumbling properties low drag, for virtually all soil types
	41 W Long body Sleek and curved For soil with high quantities of loam and clay Best results on light soils too For high working speeds without casting up harvest trash
	46 W mould board NEW Wide furrow for wider tyres. Best crumbling effect and excellent performance on slopes.

Plough body shapes

Reliable decomposition of harvest trash feeds life back into the soil and is a critical factor in contributing to yield.
Only trash that has been ploughed in neatly will not cause problems during subsequent passes.
SERVO bodies fulfil all requirements, as years of field tests have proven regarding the reliability and service life of the materials.

ROBUST

Plate thickness
8 mm thick fine-grain steel hardened right through - extremely wear resistant

Slatted mould boards
Lower drag resistance due to smaller effective surface area.
Slats are swept away conically at rear so that stones cannot become trapped.
10 mm thick slats hardened right through - extremely wear resistant.

Pöttinger analyses each mechanical wear scenario in practice before coming up with a diagnosis and then recommending the necessary design improvements.

Hardened right through
The new heat treatment system enables the mould boards to be fully hardened (a transformation of the microstructure) -> through the whole thickness of the board. Much more resistant to wear than conventional three-layer mould boards.
The mould boards are of fine-grained boron steel and are 8 mm thick.

Detailed information

Medium-weight fully reversing ploughs,
4 to 5 shares
Plough beam tube 140 x 140 x 10 mm / 5.15 x 5.51 x 0.39 in
Under-beam clearance 80 cm / 31.5 in
Body spacing 95 and 102 cm / 37.4 and 40.15 in
for tractors up to 170 hp

Headstock

Top link retention plates are extra thick to improve snug fit of pin
3 top link positions - middle position is slot for the best possible ground tracking and rapid penetration
Heavy-duty limit stops
Mounting axle has 4 positions - the right position for the lower links on every tractor - always achieves the best clearance. Secured with anti-twist lock
Transport interlock operated by lanyard from driver's seat

Reversing mechanism

Reversing unit made from heat-treated cast iron - not welded to reversing axle
Heavy-duty tapered roller bearings
Reversing axle is heat treated and induction hardened - high resistance to bending
Reversing cylinder with check valve

Diameter of reversing axle

	outside	inside
	Ø 110 mm/ 4.33 in	Ø 60 mm/ 2.36 in	hollow shaft

Plough beam pivoting as an option

For reversing with wide furrow width, wide share spacing or low clearance.
Only the plough beam is pivoted hydraulically, the furrow width adjustment remains unchanged.
Pivoting range is infinitely adjustable.
Narrow for road transport and parking.
Hydraulic cylinder is fitted with check valve as standard, the hoses are not under pressure during ploughing.

Plough beam tube reinforced with inside web

Two additional bolted reinforcements at the point of maximum stress
Intelligent solution for rigidity at the point of maximum bending for overall reduction in weight
Inner web increases resistance to bending by 25 %.

Images/Videos

Image gallery

SERVO 45 PLUS
Press image (high res.)

SERVO Einstellzentrum
Press image (high res.)

Videos

	SERVO Pflüge Online Video, 7:06 min.
	BODEN und SAAT Video SERVO, LION, SYNKRO, TERRADISC und Sämaschinen Online-Video, 5:27 min.
	SERVO 6.50 Aufsattelpflüge Online Video, 4:58 min. Ein Video von www.landwirt.com
	SERVO 45S Online Video, 4:41 min. Ein Video von www.landwirt.com

Brochures

SERVO Mounted ploughs
36 pages [97+210.02.0911]

File size: 4.748 KB

Text:
Salutation*:
First name/Last name*:
Street*:
ZIP City*:
Country:
Phone*:
Job*:
E-Mail*:
Contact:	Yes, please contact me
Check-Code*:	Reload image
*) Obligate