The cam track is infinitely variable adjustable. As a result your rake can be adapted flexibly to different crops and harvesting conditions.
The tine arms are removable to reduce width during transport and height for storage. These are easy to plug in; it is not possible to slot them in incorrectly.
Tidy raking work is provided by 10 to 15 tine arms per rotor, depending on the working width.
Our rotor units are built so that the stress on the bearings is as low as possible. Wear is minimised as a result. The large diameter cam track with its smooth ramps makes sure that the tines exit the swath ergonomically. Maintenance-free steel cam rollers, high strength cam shafts and wide spacing of the tine arm bearings reduce the force acting on the bearings.
The large cam tracks offer a cam track diameter of up to 420 mm and a bearing spacing of up to 900 mm on the tine arms. These properties give the tine arms maximum strength. The robust tine arm profile is also extremely resistant to twisting and bending, as these forces are dissipated along the edge sections.
Rake | Rotor diameter | Cam track diameter | Tine arm bearing spacing |
TOP 342 / 382 | 2.8 m / 3 m | 350 mm | 300 mm |
TOP 612, 612 C / 702 C / 662 | 2.8 m / 3.07 m | 350 mm | 450 mm |
TOP 652 | 3 m & 3.15 m | 350 mm | 450 mm |
TOP 632 A / 422, 422 A, 762 C, 762 C CLASSIC, 692 A, 722, 1252 C, 1403 C | 3 m / 3.3 m | 420 mm | 600 mm |
TOP 462, 462 A, 782 A, 882 C, 812, 1403 C | 3.7 m | 420 mm | 700 mm |
TOP 962 C | 4.3 m | 420 mm | 900 mm |