1 Mounting
Versatile three-point headstock can be individually adapted to the tractor with different mounting system categories. Optimised geometry for easy lifting away and perfect power transfer.
2 Turnover mechanism
A large turnover unit reduces bearing forces. Reliable beam angle setting thanks to closed beam guide and beam angle lift. The turnover shaft is a thick hollow shaft that also serves as a leadthrough for the hydraulic hoses. These are optimally protected against possible damage.
3 SERVOMATIC control centre
The main setting of the SERVOMATIC control centre is based on the inside track width of the tractor. The pulling point is automatically adjusted by the optimised four-joint linkage. Thanks to the floating lower linkage, the plough aligns itself along the ideal tractor-plough pull line.
Thanks to the neat layout of the control centre, each of the adjustment points is easily accessible. The front furrow width is easily adapted mechanically or hydraulically. The pulling point correction take place mechanically and in combination with a plough beam pivot cylinder is integrated into this function. The plough beam pivot cylinder guarantees easy turnover even with a high number of furrows and a large furrow width, while minimising wear.
4 PLUS
The furrow width of the individual bodies can easily be adjusted from the tractor seat. Depending on the point-to-point spacing and the plough series, different furrow widths can be achieved. The furrow width of the front plough body is adjusted automatically.
5 Frame
Thanks to the ingenious plough beam concept and the large main beam section with a reduced number of holes, the frame is extremely robust and resilient to stress. All bearing points and mounted tillage tools are protected by a design that is engineered to minimise the forces acting on them.
6 Depth and transport wheels
For perfect depth control, a wide choice of dual depth wheels through to large transport pivot wheels is available, depending on your requirements. The depth control wheels are mounted close to the plough beam to improve fenceline ploughing performance. For a quick change of the working depth, hydraulic depth wheel adjustment is available as an option.
7 NOVA stone protection
The hydraulic stone protection system ensures reliable operation in areas with a high number of stones. The integrated hydraulic cylinders are optimally protected and ensure a smooth response when triggered thanks to the central accumulators.
Triggering pressure can be adjusted between 1,200 and 1.500 kg
Rapid soil re-entry due to increasing pressure after tripping
Trip clearance 42 cm cm