|SYNKRO 4030 T||SYNKRO 4030 T NOVA||SYNKRO 5030 T||SYNKRO 5030 T NOVA|
|Working width||4 m||4 m||5 m||5 m|
|Tines||14 pcs.||14 pcs.||18 pcs.||18 pcs.|
|Leg dimensions||60 x 25||60 x 25||60 x 25||60 x 25|
|Disc spacing||280 mm||280 mm||280 mm||280 mm|
|Row spacing||75 cm||75 cm||75 cm||75 cm|
|Levelling discs||8 pcs.||8 pcs.||11 pcs.||11 pcs.|
|Beam dimensions||100 x 100 mm||100 x 100 mm||100 x 100 mm||100 x 100 mm|
|Under frame clearance||85 cm||85 cm||85 cm||85 cm|
|Triggering pressure of stone protection system||-||550 kg||-||550 kg|
|Clearance height||-||25 cm||-||25 cm|
|Power requirement||150 hp||150 hp||180 hp||180 hp|
|Transport width||3 m||3 m||3 m||3 m|
|Weight of basic version||2830 kg||3305 kg||3680 kg||4280 kg|
|Weight cage roller Ø 660 mm||610 kg||610 kg||766 kg||766 kg|
|Weight double cage roller 540/420 mm||760 kg||760 kg||880 kg||880 kg|
|Weight Rotopack roller||-||-||-||-|
|Weight knife ring roller Ø 540 mm||-||-||-||-|
|Weight pack ring roller Ø 550 mm||820 kg||820 kg||1010 kg||1010 kg|
|Weight rubber packer roller Ø 590 mm||-||-||1000 kg||1000 kg|
|Weight CONOROLL Ø 540 mm||-||-||-||-|
|Weight Tandem CONOROLL Ø 560 mm||950 kg||950 kg||1160 kg||1160 kg|
|SYNKRO 6030 T||SYNKRO 6030 T NOVA|
|Working width||6 m||6 m|
|Tines||22 pcs.||22 pcs.|
|Leg dimensions||60 x 25||60 x 25|
|Disc spacing||270 mm||270 mm|
|Row spacing||75 cm||75 cm|
|Levelling discs||13 pcs.||13 pcs.|
|Beam dimensions||100 x 100 mm||100 x 100 mm|
|Under frame clearance||85 cm||85 cm|
|Triggering pressure of stone protection system||-||550 kg|
|Clearance height||-||25 cm|
|Power requirement||210 hp||210 hp|
|Transport width||3 m||3 m|
|Weight of basic version||3790 kg||4650 kg|
|Weight cage roller Ø 660 mm||850 kg||850 kg|
|Weight double cage roller 540/420 mm||1040 kg||1040 kg|
|Weight Rotopack roller||-||-|
|Weight knife ring roller Ø 540 mm||-||-|
|Weight pack ring roller Ø 550 mm||1190 kg||1190 kg|
|Weight rubber packer roller Ø 590 mm||1120 kg||1120 kg|
|Weight CONOROLL Ø 540 mm||-||-|
|Weight Tandem CONOROLL Ø 560 mm||1370 kg||1370 kg|
|Mounting option||Three point linkage c/w enclosed lower link pins |
|Mounting category||Cat. II / 2 |
Cat. III / 3
|Working depth||5 - 30 cm|
|Folding||two splines |
|Point type||Chisel point with wings |
|Levelling discs||Scalloped |
|Lighting||With warning signs and lighting |
|Hydraulic connections||2 x double acting |
|Electrical connection||1 x 7-pin lighting plug |
|Standard equipment includes||Mounting for rear roller |
The transport chassis ensures that the hitch and rear axle of the tractor are not overloaded. The chassis is wide with a low centre of gravity for excellent driving stability and it can be lowered for road transport. The automatic transport interlocks also contribute to safety on the road.
SYNKRO 4030 T / SYNKRO 5030 T / SYNKRO 6030 T
The transport chassis is raised during operation in the field. This exerts extra load on the tines. Reliable penetration is therefore guaranteed on heavy, dry and hard ground.
On the trailed stubble cultivators, the sturdy longitudinal beams are also tapered towards the headstock. Perfect power transfer across the entire working width.
The cultivators are folded in two halves to achieve a low transport height. The transport interlock system engages and disengages automatically using a hydraulic cylinder and locking pin.
The drawbar is mounted on the standard headstock. The adjustable top link allows a perfect match to the tractor. Optimum ground clearance at headlands and during transport is ensured. The lower linkage mounting yoke features Cat. 3, width 2 or Cat. 3, width 3 clevis-type lugs. Cat. 4 is available as an option. A telescopic drawbar with various connections is also available. A steering angle of up to 95° is possible with an overall tractor width of 4.20 m. Hose holders and parking stands come as standard.
Working depth is easily adjusted using a pin-in-hole system on either side of the implement. Access is easy and risk-free.
Only one adjustment point at the front on each side – even on trailed cultivators.
The position of the rear roller is locked to provide additional transfer of weight from the rear roller to the stubble cultivator.
New: Hydraulic depth adjustment as an option
Infinitely variable response to different soil conditions
Clearly visible working depth indicator.
Support wheels are adjusted automatically.
Two 260/70-15.3 front support wheels are available to provide ground contour following. Depth is adjusted using a ratchet turnbuckle each side.
The chassis is mounted at the rear with supports through to the headstock. Perfect adjustment for the rear roller and plenty of lifting height are guaranteed. 500/45-17 tyres are standard, while for softer ground 550/45-22.5 tyres are also available.
Safe on the move
Air brakes or hydraulic brakes are also available to provide enhanced safety at driving speeds up to the legal limit. A hand brake is provided for safe parking.
SYNKRO NOVA models are equipped with overload protection. PÖTTINGER has completely updated the NOVA stone protection system and it now features a newly-developed horizontal spring unit. When obstacles are met, uninterrupted working is guaranteed by safe tripping and the large movement arc.
The triggering force of 550 kg diminishes as the leg is raised – stones are not pulled up or loosened. This protects both the cultivator and the tractor.
On the SYNKRO NOVA the first row of tines is located as far forward as possible to bring the weight as close as possible to the tractor.
Two tine positions for reliable ground penetration.
Additional, the tines are also protected by shear bolts.
Maintenance-free, rubber-mounted levelling discs
The levelling discs on the SYNKRO NOVA are also equipped with maintenance-free overload protection.
Proven over many years in the field, the maintenance-free NON STOP trip protection system features 40 mm-thick rubber elements.
The sealed bearings are maintenance-free and do not need to be lubricated.
A labyrinth seal provides perfect protection for the bearing.
Levelling tines are also available as an option in lieu of the discs.
Proven on all types of soil
SYNKRO tine points and wings ensure thorough mixing of the soil thanks to their adjustable position. The rate of wear of the tines depends on driving speed and the type of soil. Sandy and rocky soil subject implements to the highest rate of wear. DURASTAR coatings extend the service life of tools considerably.
Cultivator chisel points and wings
Double the durability compared to standard points.
High quality coating on the front side of the point.
High tungsten-carbide content for longer service life.
Resistant to wear even in stony conditions.
Special point shape with higher volume in the area subject to most wear.
DURASTAR PLUS points
High quality base material and hardened metal for the points
Much longer service life and higher resistance to fracture for top reliability
Up to six times more durable – saving costs and time
Improved penetration, lower power required thanks to sharper cutting edges
Optimum loosening and mixing through of soil
Coated on the underside of the wing.
Double the durability compared to standard wing share.
Much higher wear resistance thanks to high quality steel that retains tine shape.
Coating even withstands stone impact.
It's your choice. PÖTTINGER offers a wide range of rear rollers for perfect results with the desired tilth in any type of soil. The whole range of rollers features precision manufacturing and robust design engineering.
The ideal roller for dealing with dry, non-sticky soils. The roller is fitted with strong bars for optimal compression.
Diameter 540 mm, 11 bars.
Diameter 660 mm, 12 bars.
The double cage roller is fitted with two different diameter rollers (540 mm front and 420 mm rear). The pendular function ensures optimum ground tracking and perfect tilth.
The advantages of the knife ring roller with a diameter of 540 mm include enhanced tilth and consolidation by means of wedge-shaped rings. The knives between the rings break up clods and keep the rings clean. Compression in strips has the advantage that water can be absorbed better. The right choice if you are working on dry and heavy soil with no rocks or stones.
The packer rings, which are enclosed, have a diameter of 550 mm. eight rings per metre of working width. The roller leaves consolidated ridges, promoting drainage and soil respiration. This is the ideal roller on stony, damp ground with large quantities of organic matter. The scrapers are coated for an extended working life.
This roller consists of rings with a diameter of 540 mm. Each ring is made up of four conical segments that are offset to the left and right. The result is a slot with alternate indentations on either side. When rainwater seeps into these indentations, they prevent it from flowing away. Erosion caused by rainfall is minimised thanks to the optimum structure created on the soil surface. The loose soil between the rings ensures good drainage. The gap between each ring is 15 cm. Spring-mounted scrapers are located in between. These promote the formation of a fine tilth while keeping the space between the rings clean. The load-bearing capacity of the CONOROLL is limited on very light soil. This is an ideal roller for medium to heavy soils. The side segments are covered. This guarantees trouble-free operation in harvest residues and stones.
The Tandem CONOROLL consists of 2 rollers. The diameter of the rings is 560 mm. Each ring is made up of four conical segments that slant to the left and right. Erosion caused by rainfall is minimised thanks to the optimum structure created on the soil surface. The loose soil between the rings ensures good drainage. The spacing between the rings is 15 cm. Works well on light soil. Ideally suited to trailed machines. The inclination of the roller can be adjusted to allow for the working depth and conditions. This guarantees trouble-free operation in harvest residues and stones.
Rotopack rollers mix particularly intensively – for light to heavy, nonsticky soils. Harvest residues remain on the surface of the soil and protect your soil against drying out. Working width 3.0 m.
The perfect roller for widely varied soil conditions. Especially for use with trailed implements where the load-bearing capacity of other rollers is near the limit. A diameter of 590 mm and the special profiling allows the soil to be compacted in rows. The scrapers are coated for an extended working life.
The TEGOSEM cover crop sowing unit combines soil cultivation and sowing a catch crop in a single pass to save time and costs. The TEGOSEM can be combined with the PÖTTINGER SYNKRO stubble cultivators as well as with TERRADISC disc harrows. This new unit can be used together with three-point mounted implements and trailed machines.
The TEGOSEM is operated from the driver’s seat using a convenient control terminal.
Metering shaft control & monitoring, Output rate electronically adjustable
Display in kg/ha
Total hectare counter and daily hectare counter
Calibration button -calibration at the press of a button
Emptying function to drain seed hopper
Filling level sensor
DGPS sensor for speed sensor
Pressure supervisor on hydraulically driven blowers for trailed machines
Sensors on top link or chassis for start/stop metering
Safe access using platform
One rough seed and one fine seed metering wheel are supplied with the drill as standard.
The seed material is distributed evenly with the TEGOSEM. The metering system is driven electrically. Two different metering cell wheels are provided as standard to ensure precision distribution for small or large seeds even at low seed rates. Eight outlets handle seed distribution.
The seed material is distributed pneumatically using distribution plates. This guarantees pinpoint precision regardless of the wind conditions. The distributor plates are adjusted by changing the shaft angle. The blower is driven electrically up to a working width of 4.0 metres and hydraulically when wider than 5.0 metres. For trailed stubble cultivators and disc harrows, such as the SYNKRO T and TERRADISC T, the TEGOSEM is only available with a hydraulically driven blower.
Calibration is easy: the calibration procedure is started at the press of a button. A calibration bag is provided as standard equipment. A logical guide makes each calibration step easy to follow.
A sensor on the top link detects when to start and stop metering. On trailed machines, this is detected using a load cell on the drawbar.