| Chassis | Tandem unit 18 tonnes |
| Axle | Trailing steering axle |
| Chassis suspension | Parabolic leaf springs with stabiliser strut |
| Travelling speed max. | 60 km/h |
| Mud guards | diagonal |
| Braking system | Air brakes with braking force balance valve |
| Tyres - profile | 710/50 R 26.5 |
| Mounting | Automatic transport and loading position |
| Drawbar | Low-slung |
| Ring hitch | Ball coupling K80 |
| Drawbar weight, max. | 4000 kg |
| PTO shaft | Double wide-angle PTO shaft, Equipped with a cam-type clutch |
| PTO shaft profile | 1 3/8" 6-splines |
| Pick-up | Controlled floating 6-row pick-up with mechanical driveline, pick-up width 1,890 mm as per DIN, floating suspension |
| Pick-up (optional) | Controlled floating 7-row pick-up with mechanical driveline, pick-up width 2,350 mm as per DIN, floating suspension |
| Support wheel | trailing, not foldable |
| Loading rotor | POWERMATIC PLUS |
| Transmission | Side-mounted bevel gear unit submerged in oil |
| Main driveline - overload protection | 2500 Nm |
| Chopping system | POWERCUT short chop system |
| Number of knives | 45 pcs. |
| Structure | Conical all-steel body with pivoting front panel for additional loading volume |
| Front panel | Loading unit is controlled by pivoting front panel with dynamometer bolt system and measuring point on the moveable forage compression flap |
| Lighting | LED Loading chamber lights |
| Tailgate | Tailgate with angle sensor and automatic scraper floor switch-off |
| Operation | Profiline comfort control, load-sensing capable, ISOBUS capable, without terminal |
| Hydraulic connection | 1 x Load sensing connection |
| Electrical connection | 1 x 7-pin lighting plug 1 x ISOBUS connector |