The longer the day in the field, the more important the convenience features become. That is why the BOSS 2000 ALPIN can be equipped exactly to meet your needs: From the simple Basicline preselect system, to the extended Selectline preselect control system - and the top-end comfort control system. Operating all loader wagon functions using the Profiline comfort control system, functions are controlled using load sensing or the power beyond system.
The BASIC CONTROL preselect system enables multiple functions to be performed by a single spool valve at the push of a toggle switch.
BASIC CONTROL is the version that is installed as standard. It is used to operate the pick-up and tailgate using a toggle switch. The scraper floor is controlled using a separate spool valve.
An integrated LED displays the position of the tailgate. This means you can be sure that the tailgate is completely closed after unloading because the LED goes out. The optional hydraulic parallel lift drawbar can also be operated using a separate spool valve.
Tractor requirements:
One double-acting connection for the pick-up and tailgate
One single-acting connection with pressure-free return for the scraper floor.
As an option, the BOSS 2000 ALPIN can be specified with the electronic Selectline preselect control system. With the ISOBUS-compatible SELECT CONTROL system, the functions to be operated can be preselected and then controlled using the tractor's spool valves.
In addition, this system and the Profiline system include a signal indicating when the wagon is full as well as a job counter for silage operations.
The loader wagon pick-up, scraper floor and tailgate are operated as standard directly via the tractor’s remote valves.
Tractor requirements:
One double-acting connection for the pick-up, parallel lift drawbar, and tailgate
One single-acting connection with pressure-free return for the scraper floor.
With the Profiline comfort control system, all the hydraulic functions are operated using load sensing or power beyond.
The functions are performed directly at the push of a button without pre-selection or an additional spool valve.
As options, either of the two control terminals POWER CONTROL or EXPERT 75 can be specified with this system.
The controls at the rear of the BOSS 2000 ALPIN are extremely easy to operate using a manual lever.
The loading procedure can simply be observed from behind while the controls are being operated at the rear.