Tines measuring 18 x 340 mm are available for machines with 3.3 rotors per metre and a rotor diameter of 310 mm. This results in an overlap of 16 mm. In this configuration, the tines can be mounted in the aggressive position. The larger rotor diameter and the strong tines create an excellent flow of soil even in stony conditions.

Machines with 4 rotors per metre are equipped with tines measuring 15 x 330 mm. With a rotor diameter of 285 mm and an overlap of 40 mm, the tines prepare the seedbed with a particularly fine tilth. More durable tines measuring 18 x 330 mm in DURASTAR quality are available as an option for more abrasive types of soil. Due to their smaller rotor diameter, only a sweeping tine position is possible on these machines.

Save time, increase output

Constantly changing soil conditions are demanding on tillage tools. Practical experience shows that only what can be done easily and quickly is then really done. In order to ensure consistent working results, the tines need to be replaced after a certain period of time, depending on the site specific conditions and the hectares covered.

Maximise tine life

To achieve the maximum service life, you can install DURASTAR and DURASTAR PLUS equipment in addition to the standard tines. These are even more wear-resistant and are characterised by their extra hard coating.

DURASTAR

DURASTAR tines are available as an option for all LION power harrows
Special tungsten carbide coating on both sides of the tine
2 times longer service life compared to standard tines

DURASTAR PLUS

DURASTAR PLUS is available as an option for 18 x 340 mm tines
Tungsten carbide plate brazed onto the side for extra wear protection
4 times longer service life
Not recommended for tines set in an aggressive position

Secure mounting

Our tines are mounted using a clamping plate as standard. Two bolts secure the clamping plate to the tine carrier, which needs to be loosened to change tines.

Easy to swap around with QUICK FIX

To make it easier to replace the tines, the QUICK FIX quick-change system with folding lynch pins is available in addition to the standard bolt fastening. The tines can be changed or swapped around easily and conveniently in just a few steps.

Remove lynch pin and lock pin

Remove tines

Fit new tines