The NOVACAT V 10000 mower combination is operated as standard using the Selectline pre-select control system. As an option, it can also be operated using the Profiline control system and power beyond hydraulics package. The intuitive control system and well thought-out automatic functions will not only make your work easier. You will also be pleased with the high quality of work.


Selectline preselect control system

The ISOBUS-capable Selectline pre-select unit sits directly on the machine. This can be connected directly to an ISOBUS connection cable or the SELECT CONTROL terminal.

All functions are first preselected using the control terminal and then carried out using the tractor's spool valves. Only one double-acting hydraulic connection is required.

  • Automatic individual lift system

  • Optional hydraulic folding side guard

  • Synchronous hydraulic working width adjustment

  • Hydraulic transport release

  • Weight alleviation pressure for mower units is adjusted manually at the hydraulic valve block

  • Maintenance management – displays greasing and oil change intervals depending on operating time


Profiline comfort control system

With the Profiline comfort control system, you can control the NOVACAT V 10000 either using your ISOBUS tractor terminal or another control terminal such as the CCI 1200, EXPERT 75, or POWER CONTROL. The hydraulic oil supply is via load sensing.

  • Independent hydraulic working width adjustment for both mower units

  • Hydraulic weight alleviation with automatic working width adjustment

  • Section Control activated by job computer

  • Individual mower unit lifting system with headland management and integrated front mower control. In combination with AEF TC-SC certified terminals and PÖTTINGER CONNECT, the individual mower units are automatically raised and lowered at the headland, depending on the GPS position.

  • Hydraulic guard folding and transport interlock


Automatic tilt control

The NOVACAT V 10000 can be equipped with an automatic tilt control system as an option. On slopes, the mower units are shifted automatically so that no streaks are left standing even if the mower combination drifts sideways. On mowers with the COLLECTOR system, the belt speed is automatically controlled so that when working along contours the belt conveying uphill runs at a higher speed, and vice versa. This guarantees uniform swaths.


Always the right mounting height

On the NOVACAT V 10000 there is an indicator integrated into the display on the control unit for the correct mounting height. This means that if the hitch has been lowered during road transport to achieve a lower transport height, the correct operating height can be easily found again.

Correctly positioning the front hitch guarantees perfect ground tracking and uniform ground pressure over the mower's entire freedom of movement.


Section Control

NOVACAT V 1000 mowers with the Profiline comfort control system are Section Control capable as standard. With the corresponding equipment on the tractor, the individual mower units can be automatically lifted and lowered at the headland, depending on the GPS position. The front mower is also controlled.


Automatic swath placement

Automatic swath placement makes mowing and merging easier. The cross conveyor units on the NOVACAT V 10000 COLLECTOR switch on and off automatically depending on which lane is chosen for the swath. The system is particularly easy to use, especially for intelligent swath merging when alternate lanes are skipped. The repetitive task of changing the direction of the conveyor system is handled automatically.