Convenient operation
Convenient operation
Standard control version
The various functions are set as standard using control levers on the drawbar. You only need 3 double-acting remote valves for this.
Standard control version
Operation
The basic machine settings are set using the control levers (see figure above).
1st spool valve: folding the disc harrow
2nd spool valve: operating the parking stand and chassis (blue preselect). adjusting side pull, pre-tension of the frame sections and damping the rear roller (grey preselect).
3rd spool valve: Working depth adjustment of 5 to 15 cm for jockey wheels and rear rollers (black control lever). The working depth is set using swing clips. This spool valve also controls the machine being lifted by the rear roller at the headland.
You can easily control the headland lifting sequence and the disc harrow folding system from the tractor seat during operation. All without leaving the cab.
Profiline equipment for ISOBUS
Our Expert 75 control terminal is a modern ISOBUS system. This equipment is available as an option. You can control all the settings from the tractor seat. All without leaving the cab. A load sensing system for perfect ground tracking and for protecting your tractor's hydraulic components.
Expert 75
Benefits of the Profiline system
All cylinders are equipped with position sensors so that parameters such as pre-tension pressure and exact working depth are displayed on the screen.
A hectare counter and operating hours counter with memory enable exact documentation of each job.
Operated at the press of a button
Operated at the press of a button
Working depth variable between 5 and 15 cm
Folding the disc harrow
Inclination adjustment - no side pull
Pressure adjustment of the frame sections for consistent ground tracking.
Pressure adaptation of the shock absorber for smooth operation.
Adjustment of the working depth when disc diameters decrease.
Headland sequence - lift and lower at the push of a button or using the tractor's control system via a joystick.