1 EUROMATIC PLUS
The loading rotor with a diameter of 800 mm achieves a high throughput during chopping, conveying and compacting. The 10 mm thick conveyor tines are made of durostat 500 hardened and tempered boron steel and feed the crop perfectly into the chopping system.
2 Scraper beam
The large scraper area inside the loading chamber ensures excellent conservation for all types of forage. This makes the EUROPROFI highly suitable for mixed farming operations.
3 POWERCUT
Chopping system with a theoretical chopped length of 39 mm.
4 Knife protection system
The reliable knife protection system protects the loader wagon from foreign objects, avoids downtimes and promotes a consistent chop length for the highest possible forage quality.
TWIN BLADE
Reversible blades guarantee a consistently sharp cut and you always have the spare blades with you.
The drive train on the EUROPROFI loader wagon has been designed for high performance and is suitable for tractors up to 220 hp.
These new models are driven by a PTO shaft with a wide-angled joint and a cam-type clutch to protect the driveline. The large-dimensioned grease filled rotor side drive gearbox is completely maintenance-free.
The main bearing is located on the rotor frame between the rotor and gearbox to protect the bearing and gearbox.
The driveline is protected at a torque of 2,000 Nm, corresponding to a peak performance of 162 kW / 220 hp.
The smooth running and fuel-saving loading rotor.
EUROMATIC PLUS is the heart of EUROPROFI loader wagon series. Rugged and powerful, the rotor delivers high output chopping and compression. EUROMATIC PLUS stands for smooth, power-saving penetration of the crop and perfect transfer from the pick-up.
The loading rotor has eight rows of tines arranged in a spiral and a diameter of 800 mm.
The loading rotor is mounted on self-aligning ball bearings at both ends.
The bearing is located on the rotor frame between the rotor and gearbox to protect the bearings and gearbox.
Wide surfaces on the tine points ensure maximum performance even with wet and short forage. The optimised tine shape and large scraper surface ensure the best possible compression in the loading chamber. The conveyor tines are made of hardened fine-grain durostat 500 and are 10 mm thick. The tine rings are hooked into the central drum and welded around the circumference for exact positioning.
The scrapers have an 22 mm wide rear face and are individually mounted and bolted. They ensure the highest possible compression, depending on how the automatic loading system is set.