The primary focus of the ALPINHIT 6.6 is also on lightweight design and perfect ground tracking. Designed especially for alpine regions and with a working width (DIN) of 5,75 m, you can work efficiently and cost effectively.
Weighing in at just 564 kg, this is a powerful lightweight.
The ALPINHIT 6.6 is equipped with a pivoting headstock and mechanical stabiliser struts as standard.
The ALPINHIT 6.6 follows in the tractor's tracks thanks to its pivoting headstock. When cornering, the tedder follows the tractor without swivelling out. The vertical axis of rotation prevents under-running when working downhill.
When the tedder is raised, the heart-shaped pivot pin automatically centres itself in the motion link to secure the machine in the centre position. This design guarantees the greatest lifting height at the headland even when used with small tractors, because the tedder does not sag.
Two mechanical stabiliser struts are fitted as standard to the headstock to ensure that the machine runs smoothly during operation. These gently centre the machine. This also gives you the advantage when working on slopes. At the headland and during road transport, they support the centring of the heart-shaped pivot pin.
Mechanical fenceline tedding system
The ALPINHIT 6.6 is equipped with a mechanical fenceline tedding system as standard. The wheels on all six rotors are set individually by hand. Lever positions centre – left – right.
LIFTMATIC is a valve on the pivoting headstock heart-shaped pivot pin. While the tedder is being lifted, it automatically interrupts the oil flow between the spool valve on the tractor and the two hydraulic cylinders that lift the rotors.
In doing so, it temporarily disables the float setting required for ground tracking so the rotors can be held in a straight line. This guarantees sufficient ground clearance at the headland.
With the optional HYDROLIFT system, the outer pairs of rotors are actively raised into an interlock position by briefly actuating the spool valve. This system achieves an impressive ground clearance height at the headland.
In the transport position, the raised rotors are tilted very close to the tractor. This favourable centre of gravity means improved safety while driving. The constant velocity joints in the driveline allow the rotors to turn in any position, eliminating the possibility of operator errors.
The transport width is 2.55 m.
Warning signs and road lights are optional.