Chassis
Conserves soil
Always look after the health of your soil. Choose the right tyres, protect the sward, and you will increase your profits.
With the right tyres, there is no contradiction between using high output technology and conserving the soil. In order to protect soil as a natural resource, to ensure sustainable soil fertility and to maintain soil performance, you need to make sure that loads are distributed uniformly. Using the largest possible dimension of wheels increases the footprint of the tyres so that the soil structure is maintained in the best possible way.
1 cm deep wheel marks cost up to 10% more diesel1).
Damage to the sward can cause yield losses amounting to €100/ha1).
Heavy compaction can result in fertiliser costs up to 20% higher1).
1) Source: Lecture by Southwest Falia Agricultural College in Soest, 2008.
Tyre size | Payload per wheel | Tyre pressure | Footprint | Pressure on ground |
710/50-R26,5 885 | 4.500 kg | - | - | - |
5.000 kg | - | - | - | |
710/50-R26,5 Country King3) | 4.500 kg | 1.7 kPa | 2.574 cm2 | 1.75 kg/cm² |
5.000 kg | 2.6 kPa | 2.132 cm2 | 2.35 kg/cm² | |
710/50-R26,5 Flotation Trac2) | 4.500 kg | 1.5 kPa | 2.794 cm2 | 1.58 kg/cm² |
5.000 kg | 1.7 kPa | 2.822 cm2 | 1.74 kg/cm² | |
710/50-R30,5 Flotation Trac2) | 5.000 kg | 1.9 kPa | 2.524 cm2 | 1.94 kg/cm² |
800/45-R26,5 885 | 4.500 kg | - | - | - |
5.000 kg | - | - | - | |
800/45-R26,5 Country King3) | 4.500 kg | 1.5 kPa | 2.920 cm2 | 1.54 kg/cm² |
5.000 kg | 1.9 kPa | 2.956 cm2 | 1.69 kg/cm² | |
800/45-R26,5 Flotation Trac2) | 4.500 kg | 1.4 kPa | 2.930 cm2 | 1.51 kg/cm² |
5.000 kg | 1.6 kPa | 2.954 cm2 | 1.66 kg/cm² | |
800/45-R30,5 Flotation Trac2) | 5.000 kg | 1.6 kPa | 2.944 cm2 | 1.67 kg/cm² |
2) Source: Apollo Vredestein GmbH
3) Source: Nokian Tyres
Tandem chassis with parabolic spring 18 t, 26.5" | Tandem chassis, hydraulic 20 t, 26.5" | Tandem chassis, hydraulic 20 t, 30.5" | Tridem chassis, hydraulic 27 t, 26.5" | Tridem chassis, hydraulic 30 t, 26.5" | Tridem chassis, hydraulic 30 t, 30.5" | |
JUMBO 7380 DB | + | o | o | - | - | - |
JUMBO 7400 | + | o | o | - | - | - |
JUMBO 7450 DB | - | + | o | o | - | - |
JUMBO 7470 | - | + | o | o | - | - |
JUMBO 7520 DB | - | - | - | - | + | o |
JUMBO 7540 | - | - | - | - | + | o |
+ = Standard
o = optional
Parabolic leaf spring chassis
The compensator arm on the parabolic leaf spring chassis ensures the load is distributed dynamically especially when braking so the same load acts on each wheel and excellent deceleration values are achieved.
With an axle compensation of 110 mm the chassis has perfect suspension characteristics in the clamp and provides smooth running in the field and on the road. The trailed axles protect the sward even with heavy loads (standard).
A large spring support spacing of 1.100 mm at the front rigid axle with a distance of 856 mm on the rear steered axle provides perfect stability. Strong longitudinal linkages apply the braking and steering force.
Anti roll bar
The anti roll bar gives you 20 % greater driving stability, best possible load distribution and better handling on steep ground and when cornering. A torsion bar on each axle connects the springs on each end to the chassis frame. When loads act on it the bar transfers the pressure automatically to the opposite end.
Optional
Hydraulic steered axles
Electronic steered axles
Intelligent trailed axles driver assist system
EBS - electronic braking system with RSP - roll stability program
Hydro-pneumatic chassis
The hydro-pneumatic chassis gives you a wide support spacing for safe handling, exceptional stability on steep ground as well as enhanced safety when driving at high speeds.
An impressive increase in driving comfort has been achieved by fine-tuning the suspension characteristics. Using a different hydraulic accumulator when the loader wagon is empty from the one when the wagon is full noticeably increases driving comfort.
The chassis with hydro-pneumatic suspension developed by PÖTTINGER absorbs shock loads in the field and on the road. Consequently, it provides markedly greater shock-absorbing comfort than rigid systems that only use tyre suspension. In addition, the tyres are subjected to less wear and the machine follows smoothly in the tractor’s tracks.
The large axle compensation of up to 270 mm ensures better climbing ability on inclines, in the clamp and on poor quality roads.
Standard leaf spring suspension
Wide support of the guide springs with anti roll bar effect – wide support spacings of 1.100 mm and 856 mm
Excellent roll or slope stability due to minimal deflection
Highest level of driving comfort in traffic and off-road
Optimum braking power thanks to equal axle load distribution
The entire vehicle is designed in accordance with the latest provisions of EU type approval.
Stable on steep ground
Instead of relying on a complicated and sluggish hydraulically engaged slope compensation, the JUMBO uses mechanics to guarantee an immediate response.
The unique mechanical anti roll bar effect is achieved by integration of longitudinal linkage springs on the chassis, the bolted connection of the axles and the wide spring spacing.
Compensation
The hydro-pneumatic axle compensation ensures uniform wheel pressure in all operating situations. In particular, less pulling power is needed when driving away from a silo plant.
It is also the best way of maximising the loader wagon’s climbing ability.
Suspension
Especially when loading up to 20 t of crop and driving at up to 65 kph, top quality vehicle suspension that functions reliably whatever the load status is crucial. What makes this chassis special is the fine-tuning of suspension characteristics when the wagon is empty or full. The result is supremely smooth running, a comfortable ride and not least greater safety when driving.
Ground clearance
The JUMBO is a hugely versatile multi-purpose rotor loader wagon that can be deployed in all conditions including difficult terrain. When developing the brake system particular attention was paid to greatest possible ground clearance.
All essential brake components are located above the axle centreline. This ensures that they are well protected and will work reliably.
Tandem chassis
With the hydro-pneumatic tandem chassis, an axle load of 20 t and overall weight of 24 t are possible. To reduce rolling resistance still further, 30.5” diameter tyres can be mounted as an option. Compared to 26.5” ground pressure is marginally reduced.
The trailed axles protect the sward even with heavy loads (standard).
The outstanding feature of this chassis is its tremendous manoeuvrability in the field.
*) Source: Apollo Vredestein GmbH
Tridem chassis
The hydro-pneumatic tridem chassis distributes heavy axle loads of 27/30 t over a large surface area.
The JUMBO 7470:
The third axle increases the net payload by 50 %. At the same time it reduces transport costs by up to 25 % depending on deployment time and duration. Compared to the tandem chassis, ground pressure per axle is reduced by -10 % from approx. 1.67 kg/cm³ *) to approx. 1.51 kg/cm³ *).
The tridem chassis is equipped with mechanical steered axles at both ends as standard.
Electronic steered axles or contactless steered axles are offered as an option.
*) Source: Apollo Vredestein GmbH
Weighing system
The JUMBO’s optional weighing system is available for the hydro-pneumatic tandem and tridem chassis. It enables dynamic weighing as a rough guide while driving, and outputs exact1) measurements when parked.
If the maximum value defined by you is exceeded, a warning is displayed on the control terminal and an acoustic signal is given.
1) Measuring tolerance +/- 2,5 %
Electronic steered axles on the tridem
EZL steering programmes for tridem axle:
Normal steering
Crab steering
Offset
Normal steering:
This programme is not always automatically activated. The steering angle is regulated according to speed.
Crab steering:
Sets the same steering angle for all steered axles.
Offset:
This special steering programme is used for anti roll compensation when driving on the slant.
Lift axle tridem
Minimises wear to the tyres when the wagon is empty.
In difficult terrain a lift axle can be deployed to temporarily increase the drawbar load and the tractor’s traction.
A safety pressure valve automatically lowers the lift axle in the event of an overload to protect the tractor.
The system is operated conveniently from the control terminal.
Hydraulic steered axles
The hydraulic steered axles guarantee absolute reliability and excellent tracking and protect the sensitive sward.
They have a track rod with a K50 ball head coupling. Thanks to the telescoping automatic interlock, the loader wagon can easily be removed by only one person. The coupling point for the steered axles on the tractor according to ISO DIN 26402 is based on the K80 ball head coupling as a backlash free towing device. This guarantees precise tracking even on steep ground and in the clamp.
Electronic steered axles
A high level of stability when driving at high speeds and the best manoeuvrability in tight corners are provided by the speed-dependent steering angle adjustment system of the electronic steered axles.
In the field, a tighter turning angle produces greater manoeuvrability and protects the ground
At high driving speeds, less of a turning angle ensures a higher level of safety
A safety steering computer controls the turning angle together with a hydraulic unit, the steering cylinders and an angle sensor on the steered axle.
No-contact steered axles
The contactless, electronic steered axles completely eliminates the need for mechanical steering angle sensors between the tractor and the wagon. A high-resolution sensor system controls the steering. By eliminating the track rod next to the drawbar, tighter turning angles are possible. Damage to track rods and tractor tyres is excluded. It is easier to attach the loader wagon because no special devices are required for coupling the track rod to the tractor.
This avoids the extra maintenance and adjustment work needed with conventional forced steering systems.
Intelligent trailed axles
With the “intelligent trailed axles” driver assist system, the loader wagon autonomously detects the movement. It allows automatic axle locking under all operating conditions even without a speed signal from the tractor.
A direction-of-rotation sensor detects the speed of forward and backward travel and locks the axle within the speed range you have previously defined.
The inclination sensor also locks the axle when the defined inclination is reached. If the defined inclination value is exceeded, you can also have a warning displayed on the control terminal screen.