The flexible TEGOSEM hopper combines soil cultivation and sowing a cover crop, microgranules or a companion crop in a single pass to save time and costs. The TEGOSEM can be combined with both linkage mounted and trailed machines.

Precision metering

With the TEGOSEM hopper, the material is metered and distributed uniformly. Two different sizes of metering shaft are provided as standard to ensure precision distribution of the seed material or microgranules using fine or coarse metering, even at low application rates.

Advantages with soil preparation machines

• Tillage and application in a single pass

• Rapid and cost-effective application of micro-granules or sowing a cover crop

• Applied either before or after the rear roller

• Mounted close to the rear roller for uniform seed emergence

• Loading platform with handrail for convenient and safe filling

• Can be retrofitted to all existing rear rollers

Reliable surface application

The fan drive is either electric or hydraulic depending on the conveying distance and the type of machine. The material is applied to the surface pneumatically using distribution plates. This guarantees full surface application regardless of the wind conditions. The distributor plates are adjusted by changing the shaft angle to vary the distribution range.

Calibration

Calibration is easy: the calibration procedure is started at the press of a button. A calibration bag is provided as standard equipment. A logical guide makes each calibration step easy to follow.

Metering start/stop

A sensor on the top link detects the signal for starting and stopping metering. During operation it is not necessary to start the metering process manually.

Hitching and detaching

• The sowing unit including coulter rail is mounted and removed without the need for tools

• Mounted on coupling points on the rear roller and top link

• Parking stands are standard