The flexible TEGOSEM hopper combines soil cultivation and sowing a cover crop, microgranules or a companion crop in a single pass to save time and costs. The TEGOSEM can be combined with both linkage mounted and trailed machines.
With the TEGOSEM hopper, the material is metered and distributed uniformly. Two different sizes of metering shaft are provided as standard to ensure precision distribution of the seed material or microgranules using fine or coarse metering, even at low application rates.
Tillage and application in a single pass
Rapid and cost-effective application of micro-granules or sowing a cover crop
Applied either before or after the rear roller
Mounted close to the rear roller for uniform seed emergence
Loading platform with handrail for convenient and safe filling
Can be retrofitted to all existing rear rollers
The fan drive is either electric or hydraulic depending on the conveying distance and the type of machine. The material is applied to the surface pneumatically using distribution plates. This guarantees full surface application regardless of the wind conditions. The distributor plates are adjusted by changing the shaft angle to vary the distribution range.
Calibration is easy: the calibration procedure is started at the press of a button. A calibration bag is provided as standard equipment. A logical guide makes each calibration step easy to follow.
A sensor on the top link detects the signal for starting and stopping metering. During operation it is not necessary to start the metering process manually.
The sowing unit including coulter rail is mounted and removed without the need for tools
Mounted on coupling points on the rear roller and top link
Parking stands are standard
For machine type | Tractor mounting | Fan drive system | Hopper location | Hopper volume | Weight | |
TEGOSEM 200 | LION 3.0 / 3.5 / 4.0 m | Rigid 3-point | Fan drive system | Rear roller | 200 litres | 185 kg |