A perfectly prepared seedbed features a uniform, level finish, an ideal proportion of fine soil and optimum consolidation. This creates perfect germination conditions for rapid and uniform growth of the plants.
With this series of efficient, high output power harrows, PÖTTINGER gives you the best possible support in achieving homogeneous seed germination.
Designed for the toughest conditions, these machines are known for delivering the best working results working solo and in combination with a seed drill.
Thanks to the configuration of the rotors, the machine actively cultivates the full working width from side board to side board. As a result, the soil is moved even along the outermost edge of the machine.
LION power harrows with 3.3 rotors per metre of working width can be used both as harrows and cultivators. All that is needed to change the application is for the tines to be repositioned. The same geometry of tine is used for both applications.
The tines on LION power harrows have a long service life and ensure consistent, effective tillage of the soil with intensive loosening and uniform crumbling.
The sweeping angle of the tines produces a good tilth structure throughout the working depth. This tine arrangement ensures that the soil is levelled to perfection. The mulch layer remains near the surface to protect against erosion.
Intensive crumbling of the soil
More harvest residues remain on the surface
Covering with a mulch layer provides good protection against erosion
Faster working speeds possible
Sweeping angle as factory setting and possible with all tine thicknesses
Set to an aggressive angle, the tine breaks up the soil from underneath. This results in good mixing of the soil, with fine tilth concentrated lower down.
The rotation direction of the rotors stays the same; only the change of tines alters the working geometry.
The tines break up the soil from underneath; highly suitable for deep seed placement and deep-rooted crop.
Excellent mixing of harvest residues into the soil
Only possible with 18 mm thick tines
Cannot be used on models with 4 rotors per metre of working width (LION 3040 / 3540)