Mould boards
Mould boards
DURASTAR
Hardened right through and carbonised
Hardened right through means consistent hardness across the whole cross-section. Carbonised: Substrate material core is elastic.
Proven plough mouldboards, hardened right through, guarantee excellent results in compact soils (heathland, black-earth soil, etc.).
Mouldboards with a special carbonised layer are characterised by impressive durability thanks to a super-hard 2.3 mm-thick surface on both sides of the board and a more elastic core. This combination ensures optimum ploughing results in soils with a variable or sticky structure.
Longer service life than 3-layer plate.
Improved soil flow reduces sticking.
Developed and manufactured by PÖTTINGER.
DURASTAR 27 Wc, 46 Wc, 36 UWc and 39 UWc mould boards
Mouldboards
Mouldboards
8 mm hardened fine grain steel - extremely resistant to wear.
DURASTAR slatted mouldboards
DURASTAR slatted mouldboards
Slats 12 mm thick and hardened right through - extremely resistant to wear. Gap between slats gets wider further back to prevent stones from becoming trapped.
Armoured chisel points and combined shares and points
Armoured chisel points and combined shares and points
Chisel points and combined shares and points with deposition welding are also available for extreme wear resistance.
Long, curved, mould board
27 Wc DURASTAR
DURASTAR mould boards 27 Wc
Low drag resistance, well suited to working on slopes. Ideal for ploughing meadow and flat land with good furrow clearance. Suitable for higher forward speeds.
Working width up to 45 cm.
Working depth up to 25 cm.
Furrow clearance up to 48 cm.
36 W
Mould boards 36 W
Long, curved mould board for heavy, sticky soil. Moderate working speed.
Working width up to 45 cm.
Working depth up to 25 cm.
Furrow clearance up to 40 cm.
41 W
Mould boards 41 W
Long, curved mould board for heavy, sticky soil. Moderate working speed.
Working width up to 45 cm.
Working depth up to 30 cm.
Furrow clearance up to 45 cm.
46 Wc DURASTAR
DURASTAR mould boards 46 Wc
Good tilth and suitable for slopes, low draft in loam and clay soils, also light soil types. A body for high working speeds without overlapping. Wide furrow clearance, low draft and excellent turning of the furrow ridge are the hallmarks of this mouldboard.
Working width up to 54 cm.
Working depth up to 35 cm.
Furrow clearance up to 53 cm.
Universal body
36 UWc DURASTAR
DURASTAR mould boards 36 UWc
Universal mouldboard with very good furrow clearance and excellent tilth at normal working speed. Large quantities of harvest residues are ploughed in tidily. A low-drag body, suitable for most soils.
Working width up to 50 cm.
Working depth up to 30 cm.
Furrow clearance up to 48 cm.
39 UWc DURASTAR
DURASTAR mould boards 39 UWc
Large universal mouldboard with very good furrow clearance and excellent tilth at normal working speed. Large quantities of harvest trash are ploughed in tidily. A low-drag body, suitable for most soils.
Working width up to 54 cm.
Working depth up to 35 cm.
Furrow clearance up to 50 cm.
Slatted mouldboards
35 WSS DURASTAR
DURASTAR mould boards 35 WSS
Slatted mouldboards with strong turning characteristics, specially suitable for peaty, medium-density and sticky soil. Especially wide furrow clearing and excellent tilth.
Working width up to 54 cm.
Working depth up to 35 cm.
Furrow clearance up to 53 cm.
38 WWS DURASTAR
DURASTAR mould boards 38 WWS
Low-drag resistance body with curved slats for excellent crumbling effect in medium to heavy soils (loam, clay). Good furrow clearance - ideal for wide tyres.
Working width up to 54 cm.
Working depth up to 30 cm.
Furrow clearance up to 50 cm.
Synthetic mouldboard
50 RW
Mould boards 50 RW
Material Robalon S, 15 mm thick, metal shin, geometry and frog same as 46 W. Long, curved, high synthetic mouldboard for soils with low stability. Wide furrow clearance. Soil flows easily along surface. Use only with combined share and point. Not suitable for stony ground.
Working width up to 54 cm.
Working depth up to 35 cm.
Furrow clearance up to 53 cm.