|TOP 1252 C|
|Working width||8 - 12,5 m|
|Working width adjustment||Hydraulic|
|Swath width||1,2 - 2|
|Rotor diameter||3,3 m|
|Rotor diameter front / rear||3,3 / 3,3|
|Transport width||3 m|
|Transport height||3,99 m|
|Transport length||10,25 m|
|Parking height without tine arms removed||3,99 m|
|Parking height with tine arms removed||3,4 m|
|Tine arms per rotor||13 pcs.|
|Tine arms per rotor rear / front||-|
|Removable tine carrier arms per rotor||13 pcs.|
|Tines per tine arm||4 pcs.|
|Rotor unit||TOPTECH PLUS|
|PTO Input Speed||540 rpm|
|Power requirement||90 hp|
|Tyres - chassis||500/50-17|
|Swath placement in direction of travel||Middle|
|Height adjustment system||Crank handle adjuster|
|Rotor tyres (standard)||16 x 6,5-8|
|Jockey wheels||Inner jockey wheels on all rotors|
|Wide angle P.T.O.||Wide-angle PTO shaft on one end|
|Mounting option||Linkage pins |
|Mounting category||Cat. II / 2 |
|PTO shaft guarding||With cam clutch |
|PTO shaft profile||1 3/4" 6-splines |
|Hydraulic connection||1 x double acting for the lifting system |
2 x double acting for the working width adjustment
1 x Load-Sensing with convenient electronic control system
1 x single-acting with free flow return line with convenient electronic control system
|Electrical connection||1 x 7-pin lighting plug for warning signs with lighting |
1 x 3-pin Cobo plug for the control system
|Standard equipment includes||Operator's manual |
Spare parts list
Inner jockey wheels on all rotors
Avoiding a backlog during harvesting demands highperformance agricultural technology. The performance of silage trailers and self-loading wagons can be increased by up to 20% if the swath is of optimal shape and uniform density.
PÖTTINGER has developed a unique hybrid drive technology: four-rotor rake.
Hydraulic drive at the front, mechanical drive at the rear.
The working width can easily be adjusted from 8.0 to 12.50 m.
Raking around obstructions is no problem.
The raking width can even be adjusted while working thanks to the pivot wheels.
This impressive and proven rotor technology from PÖTTINGER is now also integrated in the four rotor rake.
The whole tine arm can be exchanged quickly and easily in the event of any damage.
Just undo two bolts to slide the tine arm plus cam roller out of the rotor casing.
No problems with oil leaks.
Ready for action again in no time.
The hydraulic drive of the front rotors enables the extending arms to be pivoted inwards for a transport height of only 3.99 m without removing tine arms or folding safety guards. Annoying setup times are therefore a thing of the past.
Large dimensioned 500/50-17 tyres minimise pressure on the ground in the field while maximising driving comfort on the road.
Optionally available are 620/40 R 22,5 or 710/35 R 22,5 tyres.
Choose between pneumatic or hydraulic brakes.
Mechanical interlock and support for safe road transport.
PÖTTINGER ground hugging technology meets the very highest expectations. There is no better solution. The result is tidy raking work at the same time as protecting.
The tandem axles are fitted with large 16 x 6.5-8 pivoting wheels.
Pentagonal chassis (5 wheels) for inside the sweep of the tines are standard.
The MULTITAST ground hugging wheels with anti-wrap guards can be fitted as an option and – together with the floating rotor suspension – guarantee precision guidance of the tines over undulations.
Because the tandem axles are adjustable, the angle of the rotors can be adjusted precisely to the operating conditions in just a few minutes.
One double-acting remote is for lifting the rotors and two doubleacting remotes are used to adjust the working width.
An especially convenient electronic POWER CONTROL terminal is available as an option for lifting the rotors individually and adjusting the rotor height hydraulically.
Also an especially convenient electronic terminal is the CCI ISOBUS terminal with all functions of POWER CONTROL and more.
The large cam tracks on PÖTTINGER rakes offer a cam track diameter of up to 420 mm and a bearing spacing of up to 900 mm on the tine arms. These properties give the tine arms maximum strength with minimum stress on the arm bearings. The cam track can be infinitely-variable adjusted to different forage volumes and changing harvesting conditions. The rotor gears run in a sealed semi-liquid grease gearbox.
No lubrication required. TOPTECH PLUS eliminates leak problems and requires no oil checks or oil changes.
Optimised for smooth control of cam rollers. No sudden inclines in cam track so control arm follows cam track smoothly. Maintenance-free steel cam rollers, high strength cam shafts and wide spacing of the tine arm bearings guarantee high strength and low stress to the bearings. Additionally, the tine arm bearings are also maintenance-free.
The heavy-duty tine arm cross-section is strong and resistant to twisting and bending. Tidy raking work is provided by 10 to 15 tine arms per rotor, depending on the working width. The tine arms are removable to reduce height for transport and parking.
The whole tine arm can be exchanged quickly and easily in the event of any damage. Just undo two bolts to slide the inner tine arm and roller out of the rotor casing.
No problems with oil leaks.
Ready for action again in no time.
Raking has a decisive influence at the end of the harvest chain on how clean the forage remains. The tines must not contact the ground; instead they rake the forage carefully out of the sward.
The tines are positioned straight at the ground directly under the tine arm, without any need for a steep offset angle. Due to the resistance of the forage, they are pressed back slightly but do not rise upwards under load therefore the tines produce exact raking results. These tines do not need to be set so deep as others to rake tidily. This means less stress on the cam track and cam rollers. Resulting in both the sward and forage are both treated with care. The long tines are drawn smoothly out of the swath for a perfect swath shape.
The working height of TOP rakes can be adjusted from the standing position using a hand crank. This is easily accessible and maintenance-free. A height indicator makes it easy to ensure that both rotors are the same height on twin rotor rakes.
The outer pairs of tines are slightly shorter so that they do not contact the full volume of forage and the load is lower. The three inner pairs of tines are used for precision work.
Featuring a shaped support disc, the tine mounting provides a secure connection.
Tine security system
The tine security system prevents tine loss in the swath. The safety tab is secured reliably over the outermost tine bolt.
Unbeatable tine arm profile
Extremely resistant to twisting and bending forces, which are dissipated along the edge sections. The linch pin is only a security measure. Easy to slot in, it is not possible to fit the wrong way. The inner tine pairs are also easy to install. All tine arms can be removed to save space when parked.