Driveline
PTO speed – BOSS 3000
The SUPERMATIC unit is driven at 540 U/min as standard. 1.000 U/min PTO speed is also available, especially for loading zero grazing rations with a front mower. The maximum power transmission is limited to 110 PS.
PTO speed – BOSS 3000 MASTER
The drive train on the BOSS 3000 MASTER is designed for up to 130 PS. The PTO speed with the EVOMATIC loading unit is 1.000 U/min as standard.
PTO shaft
The PTO shaft has a wide angle joint at one end and a cam-type clutch which protects the drive train from overload. The PTO shaft guard is clamped onto the input gearbox on the loader wagon. Due to the profiles on the protective tube, no chain is required at the tractor end to prevent it rotating.
Chain drive
The loading unit is driven by a strong 1¼" roller chain. A tensioner ensures optimum chain tension and a long service life with minimal maintenance. The chain tension can be easily read on a clearly visible scale.
Chain greasing
The drive chain greasing system extends its service life enormously. That is why a grease pump with reservoir is installed as standard. The filling level can be easily checked on the front panel. The grease is precisely applied to the chain by 2 brushes. The grease pump is adjustable and is actuated each time the pick-up is lifted.
Pick-up drive system
The pick-up is driven by the speed-regulated driveline from the loading unit on the right side of the machine. Because it is driven by V-belt, no greasing or maintenance is required. The driveline is engaged and disengaged smoothly by a sliding clutch.