Every demand is fulfilled when it comes to versatility. You can flexibly adjust swath placement depending on the shape of the field, the volume of forage and the following harvest machines. At the same time, the MERGENTO is easy to use.
Thanks to the merger technology, even the multiple movements of the crop take place without dragging.
Variable swath placement strategies
You can conveniently set the direction of rotation and position of both cross conveyor belts individually from the tractor cab. This lets you choose different swath configurations.
It's your choice ...
Centre swath placement
The two belt units convey the forage into the middle at a distance from each other that you can define. The swath width can be varied between 0.8 m - 2 m.
Side swath to the left or right
The gap between the two belt units is reduced to a minimum. With the both belts rotating in the same direction, the mown material from the entire working width is deposited either on the left or on the right.
For a perfectly shaped swath with side placement, a swath curtain is available as an option on the right. The swath width can be conveniently adjusted hydraulically up to 1.4 m from the tractor cab. When not in use, you can simply fold it vertically.
Two separate swaths
Both belts rotate in the same direction, but the two belt units are separated by a gap that you define, so that each unit deposits a separate swath. With this swath configuration, for example, you can turn two swaths of straw at the same time.
Convey from the inside out
The two belts rotate outwards and each deposit a swath. The distance between the two belt units is either reduced to a minimum in order to cover the entire surface or maximised, for example, to leave a centrally located mowing swath untouched.
Loading forage
The belt can be switched off for a short time. This allows the crop to be transported away from awkward locations.