Rotor chassis

The TOP 612 C, 702 C and 762 C CLASSIC are equipped with a three-wheel chassis as standard.

You also have the option (standard on the TOP 762 C) of equipping your rake with a five-wheel tandem axle chassis.

Mechanical working width adjustment

The TOP 702 C, 762 C and 762 C CLASSIC are equipped with mechanical adjustment of the working width and swath width as standard. A turnbuckle is used to adjust the working width and is the ideal solution for farms where the width only needs to be changed occasionally.

An indicator scale helps you achieve the right setting.

Hydraulic working width adjustment

Available as an option, the working width can be adjusted hydraulically without leaving the tractor seat.

Also on this version, the working width indicator is clearly visible from the tractor cab.

Flow splitter

With the optional flow splitter, you can always lift the rotors evenly. This gives you additional stability on steep ground.

Sufficient lifting height

The swath curtain automatically tilts to the side for high ground clearance.

Individual lift capability

One single-acting connection to the tractor hydraulics is all that is needed for lifting the rotors. With the optional Basicline preselect system, you can choose between lifting and lowering the two rotors together or separately.

Stable on steep ground

Due to the low construction, these rakes have a low centre of gravity. AS-profile tyres also enhance safety on steep ground.

Tyres

Two different tyre packages are available for the chassis.

• 260/70-15.3 (standard)

• 340/55-16 (optional)

• 380/55-17 (optional)

• 15/55-17 AS (optional)

• 10/75-15.3 AS (optional on TOP 612 C)

Yoke tube mounting

The machine is mounted as standard using a yoke. The wide angle PTO shaft is fitted with a freewheel.

A practical PTO shaft holder and hose tidy are standard equipment for uncluttered storage.

Ackermann steering

The yoke enables a turning angle of up to 73 °. You can clearly see the steering angle indicator from the driver's seat.

There is a strong, maintenance-free steering linkage between the yoke and the axles. The Ackermann steering allows a short construction. The machine is manoeuvrable and follows in the tractor's tracks.

Optional narrow chassis frame

You can also choose a 2.55 m track width as an option for especially narrow transport widths on the TOP 702 C, 762 C, and 762 C CLASSIC.

Safe road transport

With a transport height of less than 4 m, there is no need for you to leave the tractor cab to remove tine arms before driving to the next field.

Warning signs and road lights are standard.