|TERRADISC 8001 T||TERRADISC 10001 T|
|Working width||8 m||10 m|
|Number of discs||64 pcs.||80 pcs.|
|Disc diameter||58 cm||58 cm|
|Disc spacing||12,5 cm||12,5 cm|
|Gang spacing||90 cm||90 cm|
|Under frame clearance||75 cm||75 cm|
|Power requirement||270 HP||350 HP|
|Transport width||3 m||3 m|
|Weight of basic version||8100 kg||10000 kg|
|Weight cage roller Ø 660 mm||1300 kg||1500 kg|
|Weight pack ring roller Ø 550 mm||1780 kg||2110 kg|
|Weight rubber packer roller Ø 590 mm||1500 kg||1800 kg|
|Weight Tandem CONOROLL 560 mm||2060 kg||2450 kg|
|Mounting type||50mm diameter ring hitch |
|Working depth setting||Hydraulic depth preselect |
|Disc hubs||Twin race ball bearings with six lip labyrinth seal |
|Lighting system||Warning signs and lighting |
|Hydraulic connection||3 x double acting |
1 x single-acting
|Electrical connection||1 x 7-pin lighting plug |
|Standard Equipment||580 mm scalloped discs |
Mounting for rear roller
hydraulic parking stand
hydraulic depth wheels 340/55-16 standard on TD 10001T models
1st Depth adjusted hydraulically using rear rollers
2nd Solid, forged TWIN ARM disc mounting system
3rd Large jockey wheels for perfect ground tracking
4. Choice of rear rollers for optimum consolidation
Reliable penetration even in dry conditions.
Harvest residues are incorporated blockage-free.
Perfect seedbed preparation.
Working depth variable between 5 cm and 15 cm.
The PÖTTINGER TERRADISC models offer their full working width in the field.
Wear part replacement costs are kept low because these strong discs have a diameter of 580 mm and a material thickness of 5 mm.
High output thanks to high driving speeds.
Multiple adjustment capabilities.
Low maintenance requirement – discs mounted on sealed bearings.
Convenient operation – ISOBUS functionality thanks to our EXPERT control terminal.
Carriage chassis ensures smooth running and compact transport dimensions.
A pressure correction factor for the folding sections and the rear roller can be set on both the standard control terminal versions and the ISOBUS systems.
The inclination adjustment to control crabbing is operated using the central cylinder and is also standard on both machines. Efficient operation without overlaps is guaranteed as a result.
Perfect ground tracking with +6° / -3° freedom of movement
Uniform working depth.
Reliable incorporation of high volumes of organic matter thanks to TWIN ARM system.
The best soil movement.
Ideal utilisation of the tractor's pulling power – saves fuel.
Perfect penetration and no sideways deviation is guaranteed, even on dry soil. The TERRADISC guarantees neat incorporation of harvest residues, especially with high levels of straw and mulch residues.
This is ensured by the aggressive disc angle as well as the offset arrangement of the proven TWIN ARM system. The high tare weight of the TERRADISC also ensures the dependable performance of this disc harrow. Hydraulic jockey wheels (dual depth wheel 340/55-10) are available as an option for perfect ground tracking.
The dedicated chassis ensures confident handling during road transport and in operation. Hydraulic accumulators delivers smooth operation and promote reliable penetration in all soil conditions. In addition to the hydraulic accumulators, the jockey wheels guarantee a smooth ride. These are standard on the TERRADISC 10001 T.
You can choose from the following rear rollers: Cage roller, pack ring roller, tandem CONOROLL and rubber packer roller.
At the headland the TERRADISC T is raised onto the rear roller and its weight distributed across the whole working width.
The trailed TERRADISC is therefore very light on its feet at headlands.
Ideal cultivating results are achieved thanks to optimum spacing of the discs.
There is plenty of space between the discs and the carrier arms with the TWIN ARM system. Guaranteed blockage-free, even with heavy harvest residues.
The working depth is adjustable between 5 cm and 15 cm. This is set by adjusting the jockey wheels and the rear rollers.
The frame sections are pre-tensioned hydraulically to ensure uniform ground pressure regardless of the working position. This allows the flexible frame sections to follow the ground contours with a constant working depth.
A front board is available as an option to level the soil in front of the discs. This produces a better result in ploughed fields.
The TERRADISC 8001 T and the TERRADISC 10001 T deliver an impressive output thanks to high working speeds. This is enabled by the disc harrow's strong design and large wheels.
Our 8 and 10 m TERRADISC compact disc harrows guarantee straight running of the machine without it pulling to the side. This means that it is possible to operate the machine without overlapping. This saves you time, pulling power, fuel and therefore money.
When working with the machine, take a look to see that the TERRADISC follows the tractor on its centreline. If necessary, you can then adjust the inclination of the machine so that it follows the tractor precisely. This can be set using a double-acting control valve, or directly on the terminal if Profiline equipment is installed.
In the parallel pass system, enter the working width of your TERRADISC compact disc harrow. When the machine follows precisely in the tractor's tracks, the full effective working width can be utilised without overlaps or gaps.
Our 8 and 10 m TERRADISC compact disc harrows are equipped with a dedicated chassis as standard.
The chassis is mounted directly to the main frame and linked to the headstock. This ensures a very good centre of gravity of the machine when folded, and good weight transfer to the tractor. The wide chassis with 560/45-22.5 tyres travels smoothly on the road. The transport width is 3 m and the transport height is under 4 m. The TERRADISC 8001 T and 10001 T also offer impressive ground clearance.
Air brakes or hydraulic brakes are offered as additional equipment options. These ensure safety up to the highest permissible driving speed. The parking brake fulfils all legal regulations.
The TERRADISC 8001 T and 10001 T is attached using a rotating eye drawbar as standard, designed for a 50 mm pin. The drawbar eye can be adjusted on the drawbar hole matrix to accommodate different mounting geometries.
Drawbar eyes for 30, 40 and 70 mm pins are also available.
The ball on the drawbar eye is replaceable. As a result the machine can be attached to tractors with different pin diameters.
The parking stand is hydraulically adjustable. This makes it easier for you to attach and detach the machine.
Only three double-acting spool valves are required to operate the standard version. All drawbar settings are made using pre-selects.
The various functions are set as standard using control levers on the drawbar. You only need 3 double-acting remote valves for this.
The basic machine settings are set using the control levers (see figure above).
1st spool valve: folding the disc harrow
2nd spool valve: operating the parking stand and chassis (blue preselect). adjusting side pull, pre-tension of the frame sections and damping the rear roller (grey preselect).
3rd spool valve: Working depth adjustment of 5 to 15 cm for jockey wheels and rear rollers (black control lever). The working depth is set using swing clips. This spool valve also controls the machine being lifted by the rear roller at the headland.
You can easily control the headland lifting sequence and the disc harrow folding system from the tractor seat during operation. All without leaving the cab.
Our Expert 75 control terminal is a modern ISOBUS system. This equipment is available as an option. You can control all the settings from the tractor seat. All without leaving the cab. A load sensing system for perfect ground tracking and for protecting your tractor's hydraulic components.
Benefits of the Profiline system
All cylinders are equipped with position sensors so that parameters such as pre-tension pressure and exact working depth are displayed on the screen.
A hectare counter and operating hours counter with memory enable exact documentation of each job.
Operated at the press of a button
Working depth variable between 5 and 15 cm
Folding the disc harrow
Inclination adjustment - no side pull
Pressure adjustment of the frame sections for consistent ground tracking.
Pressure adaptation of the shock absorber for smooth operation.
Adjustment of the working depth when disc diameters decrease.
Headland sequence - lift and lower at the push of a button or using the tractor's control system via a joystick.
A front board is available as an option to level the soil in front of the discs. Even large clods are broken up by this heavy-duty tool. Reliable through clearance is provided for larger levels of harvest residues. A level soil surface is guaranteed as a result.
The working depth of the front board is adjusted by a single spool valve as standard. The hydraulically adjustable jockey wheels are a prerequisite for using the front board. These ensure the best ground tracking.
The optional spring steel levelling tines deflect the flow of soil to the rear roller, crumbling and levelling the ejected mixture of trash and soil. The height of the levelling tines, which are 14 mm thick and feature tangential geometry, is adjusted when the position of the rear roller is changed.
The main height and angle settings are preset using a lock pin.
The position of the levelling tines changes in accordance with the working depth. The deeper the setting the easier the flow of material to the rear.
It's your choice. PÖTTINGER offers a wide range of rear rollers for perfect results with the desired tilth in any type of soil. The whole range of rollers features precision manufacturing and robust design engineering.
Pack ring roller
Rubber packer roller
Tandem CONOROLL roller
Suitability for stones
Diameter in mm
Weight in kg on TERRADISC 8001 T
Weight in kg on TERRADISC 10001 T
The ideal roller for dealing with dry, non-sticky soils. The roller is fitted with strong rods for optimal re-consolidation.
Diameter 660 mm, 12 bars.
The packer rings, which are enclosed, have a diameter of 550 mm. eight rings per metre of working width. The roller leaves behind consolidated ridges, promoting drainage and soil respiration. This is the ideal roller on stony, damp ground with large quantities of organic matter. The scrapers are coated for an extended working life.
The perfect roller for widely varied soil conditions. Especially for use with trailed implements where the load-bearing capacity of other rollers is near the limit. A diameter of 590 mm and the special profiling allows the soil to be consolidated in ridges. The scrapers are coated for an extended working life.
The tandem CONOROLL consists of 2 rear rollers. The diameter of the rings is 560 mm, strip thickness 8 mm. Ideally suited to trailed machines.
With two rear rollers the TANDEM CONOROLL offers excellent load bearing capacity. Consequently it is also suitable for light soils.
The inclination of the roller can be adjusted to allow for the working depth and conditions.
Rollers self-clean effectively, no scrapers required.
Raised on rear roller at headlands, so there are no problems reversing the machine.
1st Perfect entry thanks to aggressive disc angle
2nd Blockage-free operation thanks to large clearances
3rd Extended service life with tempered and forged parts
4. Worked soil – uniform and level finish following consistent movement
5. Unworked soil
A uniform level finish with the best mixing performance meets farmer's and contractor's expectations in the field. To achieve this, PÖTTINGER has optimised the geometry, size, plus both mounting angle and penetration angle of the discs. The result: low draft, perfect penetration, the best tilth and mixing effect, even in dry soil. The high tare weight of the TERRADISC also ensures the dependable performance of this disc harrow.
Two solid forged carrier arms are welded to a very wide clamping bracket. This ensures that the discs always retain their position and angle. Even in heavy soil it is impossible for them to deviate to the side – hard wheel tracks are broken up consistently.
Clever tillage tools
The rugged scalloped discs made of special heat-treated steel have a diameter of 580 mm. Eight discs per metre of working width equate to a spacing of just 12.5 cm. The optimised interplay of ground penetration angle and mounting angle ensure perfect performance. The offset configuration of the aggressive discs mixes harvest residues effectively into the soil.
For an extended service life
The strong rugged discs made of special heat-treated steel have an optimum diameter. The disc diameter of 580 mm and material thickness of 5 mm ensure a long service life. You benefit from extended replacement intervals as a result.
Ideal cultivating results are achieved thanks to optimum spacing of the discs.
Plenty of space between discs and carrier arms.
The carrier arms are angled facing the direction of rotation so that the risk of stones or harvest trash becoming lodged between the disc and arm is greatly reduced.
A large clearance between the disc and clamping bracket means large quantities of organic matter can easily pass through.
Fast operating speeds and working depths down to 15 cm mean the disc bearings have to withstand considerable stress. That is why PÖTTINGER has implemented high-quality bearings for an extended service life. This guarantees you trouble-free work even in the most difficult operating conditions.
The special twin-race taper bearings have been adopted from the construction machinery industry. Ruggedness and reliability are guaranteed as a result and impacts are absorbed effortlessly.
The sealed, twin-race taper bearings are completely maintenance-free.
A labyrinth seal provides the best protection for the bearing.
A metal cover encapsulates the labyrinth seal for additional security.
The bearings are fitted to the disc carrier arm by a stub axle.
The nuts are protected by caps mounted on the same stub shaft.
40 mm thick rubber elements have provided proven, maintenance-free NONSTOP trip leg action for many years. The clamping brackets are mounted on a thick-walled box section frame. Four rubber elements between each wide clamping bracket and the box section provide the discs with high penetration power.
On the left and right the outermost concave discs are depth adjustable. This means you achieve perfect merging of passes.
Profit from the equipment options and operate your TERRADISC 8 or 10 machine without dismounting. The Profiline version machines are set up and controlled using the ISOBUS control system. This is fully hydraulic and can be operated using the Expert 75 terminal or the monitor in the tractor.
Hydraulic depth adjustment - varying the working depth from 5 to 15 cm.
Load sensing system for perfect ground tracking and ensuring a long service life for your tractor's hydraulic components.
Fold the disc harrow at the press of a button.
The specially developed linkage for the mounting brackets on which the levelling tines (available as an option) are mounted adjusts automatically when the working depth changes. No separate adjustment necessary.
The jockey wheels ensure that a uniform working depth is maintained in all conditions. The working depth is set as standard using swing clips.
For a uniform surface finish, adjustable edging boards are provided on both sides as standard equipment. This ensures a neat interface between passes.