| Chassis | Tandem unit 18 tonnes |
| Axle | Steered axle |
| Chassis suspension | Parabolic leaf springs with stabiliser strut |
| Travelling speed max. | 60 km/h |
| Mudguard | diagonal |
| Braking system | Air brakes with braking force balance valve |
| Tyres | 710/50 R 26.5 |
| Mounting | Automatic transport and loading position |
| Drawbar | Low-slung |
| Ring hitch | Ball coupling K80 |
| Drawbar weight, max. | 4000 kg |
| PTO shaft | Double wide-angle PTO shaft, Equipped with a cam-type clutch |
| Drive shaft profile | 1 3/8" 6-splines |
| Pickup | Controlled floating 6-row pick-up with mechanical driveline, pick-up width 1890 mm as per DIN, floating suspension |
| Pick-up (optional) | Controlled floating 7-row pick-up with mechanical driveline, pick-up width 2350 mm as per DIN, floating suspension |
| Jockey wheels | trailing, not foldable |
| Loading system | POWERMATIC PLUS |
| Transmission | Side-mounted bevel gear unit submerged in oil |
| Main driveline - overload protection | 2500 Nm |
| Knife bank | POWERCUT short chop system |
| Number of knives | 45 pieces |
| Extension | Conical all-steel body with pivoting front panel for additional loading volume |
| Front panel | Loading unit is controlled by pivoting front panel with dynamometer bolt system and measuring point on the moveable forage compression flap |
| Beaters (DB) | 2 pcs. |
| Lighting system | LED Load chamber lighting |
| Rear section | Tailgate with angle sensor and automatic scraper floor switch-off |
| Control | Profiline comfort control, load-sensing capable, ISOBUS capable, without terminal |
| Hydraulic connection | 1 x Load sensing connection |
| Electrical connection | 1 x 7-pin lighting plug 1 x ISOBUS connector |