Front board breaks up clumps

The optional front board on the TERRADISC T levels the soil in front of the discs and promotes a crumbling effect, especially on ploughed fields. Even coarse clumps are broken down thanks to the sturdy drag tines. Adjustable and replaceable wear plates are fitted to the tines. Reliable clearance is provided for higher volumes of harvest residues. The front board is adjusted hydraulically. If the front board is not required, it can be folded away completely out of the working area so that it does not contact the soil.


Wheel mark loosening discs

The discs on the TWIN ARM above the tractor wheel mark can be height-adjusted by up to 5 cm. The deeper setting ensures full-surface movement and a flat finish across the whole working width. This means that it is not necessary to lower the entire machine to reliably eradicate the wheel marks. The pulling power requirement and fuel consumption are reduced as a consequence.


Edging board and edging discs

For seamless adjacent passes, the outside disc pairs and the edging boards have several adjustable positions as standard. Due to the optimised configuration of the edging board, the soil is reliably kept within the machine width. This ensures a neat connection between adjacent passes and level working results.


Levelling harrow

The optional levelling harrow, which is made of spring steel tines and mounted between the disc section and the rear roller, guides the flow of soil under the rear roller. In addition, the soil-straw mixture exiting the discs is crumbled and levelled. The height of the levelling tines, which are 14 mm thick and feature tangential geometry, is adjusted automatically when the position of the rear roller is changed. The main height and angle settings are preset using a lock pin.