PLUS – Continuously variable cutting height adjustment
The PLUS continuously variable adjustment of the cutting height gives you maximum convenience. The cutting height of all the drums can be adjusted centrally – from 40 mm to 65 mm.
A central adjusting axle inside each mower drum is raised or lowered by turning a threaded bolt. The freely rotating glide discs are attached to this axle.
The adjusting axle itself does not rotate. As a result, the glide discs do not rotate while the mower is raised. This ensures smooth running. The whole adjusting mechanism is lubricated for life. A rubber boot prevents dirt and moisture from entering. Smooth operation of the adjusting mechanism is thus guaranteed even after many years’ operation.
The PLUS continuously variable cutting height adjustment is also available as an option for EUROCAT front mowers.
Spacer rings
on EUROCAT drum mowers without a central height adjustment system, spacer rings between the glide discs and the disc hubs are used to set different cutting heights.
Two 6-mm-thick spacer rings per mower drum are also available as an option. This makes cutting heights of 38 mm / 44 mm / 50 mm possible.
High cut saucers
On all EUROCAT mowers, high cut saucers can also be used for a higher cut of an additional 20 mm.
On mowers with the PLUS continuously variable cutting height adjustment, cutting heights of up to 85 mm are possible.