The folding frame integrated into the rotor beam results in a 13 cm shorter design compared to the models in the previous series and its competitors. This makes it possible to move the weight of the machine including the rear roller closer to the tractor. Having the centre of gravity closer to the tractor means that weight is distributed better between the front and rear axle. The traction of the tractor is significantly optimised as a result.
At the same time we have increased the gap between the bearings on the rotor beam hinge points to improve the durability of the robust folding frame.
Shorter, stronger and more compact: These characteristics have been incorporated by engineering an integrated folding frame.
Thanks to the compact construction an excellent field of vision is provided even with large working widths. This is made possible by installing the folding cylinders in the headstock.
The ingenious and intuitive setting systems give the machine a perfect layout.
Depending on the working width, each side section of the machine has a deflection path of between 15 and 25 cm upwards. In addition, the LION 6002 C can adjust downward by 10 cm. This enables optimum adaptation to the ground contours.
A pressure accumulator system ensures the correct ground pressure, which is distributed evenly over the entire width of the machine. Optimum seedbed preparation is ensured even in the most difficult conditions.
The working depth is set for each frame section using swing clips and without the need for tools. The working depth is easily adjusted from the side of each folding section. The correct position is achieved by moving an integrated push rod with a scale that is easy to read. The working depth can also be adjusted hydraulically as an option.
The 15-hole matrix and ratchet wrench supplied are used to fine-tune the position of the levelling board.
When the working depth of the power harrow is changed the levelling board is adjusted automatically as well. No manual re-adjustment is needed.
Thanks to the integrated folding cylinders being located under the headstock, the LION C models offer an unrestricted view of the entire machine. In the working position the cylinders are completely retracted and therefore protected from dust and dirt.