With the folding LION C heavy duty series, PÖTTINGER extends its power harrow range north for tractors up to 500 PS.
These power harrows are designed to meet the very toughest expectations. In addition, the machine is laid out for a high level of operator friendliness. An optimum overview of the entire machine enhances safety during operation.
The series includes the following models:
LION 6002 C
For perfect seed emergence, a level seedbed of fine tilth is crucial. PÖTTINGER achieves this goal with the LION C heavy duty series with a working width of 6 metres. 20 rotors, each with a pair of 18 x 340 mm tines, ensure ideal seedbed preparation across the entire working width in the most adverse conditions.
When developing this series of power harrows, the focus was on the compactness of the machine. Integrating the folding frame into the rotor beam makes the machine more compact and improves weight distribution.
The heavy duty LION C series impresses with the highest output both in solo mode and when combined with an AEROSEM FDD front hopper seed drill.
The handling has been designed for the highest level of ease of use. Working depth and levelling board adjustment are conveniently accessible from the side. Hydraulic working depth adjustment is available as an option for highly variable soil conditions.
Thanks to the simple coupling system, with an AEROSEM FDD you have a compact, high output seed drill at your disposal. The user-friendly catch hook solution allows the coulter rail to be attached and detached in a matter of minutes to increase machine utilisation.
The highest operating convenience thanks to proven LION technology combined with the integrated folding system
The best working results to produce the finest seedbed in the toughest conditions, approved for tractors up to 500 PS
Maximum durability thanks to a large-dimensioned central gearbox and rotor beam with welded central brace
Enhanced safety during operation thanks to the compact design and best overview
Both side boards are spring mounted, pre-tensioned and equipped with guide vanes. Perfect merging between passes is guaranteed.
As an option, up to 3 hardened track eradicator tines can be mounted per tractor track with a triggering pressure of 180 kg. A front levelling board is also available as an option.
Thanks to the integrated pressure accumulator system in both sections of the machine, the sections can move downwards by 2 ° (approx. 10 cm) and upwards by 5 ° (approx. 25 cm).
Uniform pressure is applied over the entire width of the machine to maintain a consistent working depth.
A PTO driveline with 2-speed manual gearbox provides a wide speed range. The gearbox is designed for PTO speeds between 750 and 1.300 U/min This ensures that your tractor always runs within its optimum performance range. Reliability is enhanced as a result. A large dimensioned gearbox housing provides the necessary cooling.
The working depth is set from the side of the machine without the need for tools. An intuitive indicator scale acts as a guide.
Thanks to the parallel linkage, the levelling board is adjusted automatically when the working depth is changed. A total of 15 different basic setting positions can be selected.
The rotor speeds vary between 320 U/min and 430 U/min. This ensures perfect working results at all times while reducing fuel consumption. Thanks to its strongly dimensioned external gearbox, the power harrow is approved for tractor outputs of up to 500 PS. A cam-type clutch on each frame section protects the machine against overload up to 2,400 Nm.
PÖTTINGER offers a total of 3 different rear rollers in different sizes to meet your individual requirements. The rear roller is guided in a parallelogram, so that in combination with an AEROSEM 6002 FDD no readjustment of the coulter rail is necessary when changing the working depth.
With 18 x 340 mm tines, you are equipped for every job in the field. DURASTAR tines with a 60 % longer service life are available as an option.
The tines can be mounted in two positions: aggressive or sweeping. Available with the QUICK FIX tine quick-change system as an option.
The transport chassis can be adapted to ensure safe transport on the road. The chassis is hydraulically damped to make road transport smoother. This is engaged conveniently using catch hooks, which are centrally locked and unlocked using a ratchet wrench.