The requirements placed on mouldboard materials are heavily influenced by the soil conditions. That is why PÖTTINGER offers mouldboards made of different materials that have undergone additional treatment to increase wear resistance.
All mouldboards with the designation Wc DURASTAR and UWc DURASTAR feature an extremely hard outer layer combined with a flexible core. These properties are achieved by carbonising the mouldboard. The softer and more flexible core prevents fractures and cracks. The carbonising process makes the surface finish smoother, reducing wear and preventing soil from sticking.
Low draft, well suited to working on slopes. Ideal for ploughing meadow and flat land with good furrow clearing. Suitable for higher forward speeds.
Working width up to 45 cm
Working depth up to 25 cm
Furrow clearance up to 48 cm
Long, curved mould board for heavy, sticky soil. Suitable for moderate operating speeds.
Working width up to 45 cm
Working depth up to 25 cm
Furrow clearance up to 40 cm
Long, curved mouldboard for heavy, sticky soil. Suitable for moderate operating speeds.
Working width up to 45 cm
Working depth up to 30 cm
Furrow clearance up to 45 cm
Carbonised mouldboards with highly wear-resistant surfaces for maximum service life. Good tilth and suitable for slopes, low draft in loam and clay soils, also light soil types. A mouldboard for high working speeds without overlapping. Wide furrow clearing, low draft and excellent turning of the furrow ridge are the hallmarks of this mouldboard.
Working width up to 54 cm
Working depth up to 35 cm
Furrow clearance up to 53 cm
The through-hardened mouldboards are hard and tough across the whole cross-section Good tilth and suitable for slopes, low draft in loam and clay soils, also light soil types. A mouldboard for high working speeds without overlapping. Wide furrow clearing, low draft and excellent turning of the furrow ridge are the hallmarks of this mouldboard.
Working depth up to 35 cm
Working width up to 54 cm
Furrow clearance up to 53 cm
Material Robalon S, 15 mm thick, metal shin, geometry and frog same as the 46 W. Long, curved, high synthetic mouldboard for soils with low stability. Provides wide furrow clearing and soil flows easily along the surface. The 50 RW mouldboard is to be used only with a combined share and point and is not suitable for stony areas.
Working width up to 54 cm
Working depth up to 35 cm
Furrow clearance up to 53 cm
Universal mouldboard with very good furrow clearance and excellent tilth at normal working speed. Large quantities of harvest residues are ploughed in tidily. A low-draft mouldboard, suitable for most soils.
Working width up to 50 cm
Working depth up to 30 cm
Furrow clearance up to 48 cm
Large universal mouldboard with very good furrow clearance and excellent tilth at normal working speed. Large quantities of harvest residues are ploughed in tidily. A low-draft mouldboard, suitable for most soils.
Working width up to 54 cm
Working depth up to 35 cm
Furrow clearance up to 50 cm
Slatted mouldboards with strong turning characteristics, specially suitable for peaty, medium-density and sticky soil. Especially wide furrow clearing and excellent tilth.
Working width up to 54 cm
Working depth up to 35 cm
Furrow clearance up to 53 cm
Low-drag resistance body with curved slats for excellent crumbling effect in medium to heavy soils (loam, clay). Good furrow clearance - ideal for wide tyres.
Working width up to 54 cm
Working depth up to 30 cm
Furrow clearance up to 50 cm
DURASTAR mouldboards are carbonised. This does more than just optimise wear resistance. The extremely hard and therefore smooth outer layer ensures a solid working results even when ploughing soils with poor flow characteristics and varying structures.
For use on hard and dry soils, the angle of all the plough bodies can be adjusted in relation to the ground in the direction of travel. Each body is tilted forwards or backwards using an offset bolt located on the spindle, which changes the soil penetration characteristics.