Easy attachment

The AMICO F hopper easily attached to the front hitch of the tractor. Three top link and three lower linkage positions are available. Otherwise, only the seed hose, ISOBUS connector and hydraulic line need to be connected.

When attaching the hopper, make sure that it is angled slightly forward in the working position. This can be set by adjusting the top link on the tractor hitch. This has a positive effect on the flow characteristics of the material inside the hopper.

As a result, the capacity of the hopper is fully utilized because the fertiliser or seed can be metered reliably right down to the last grain.

Convenient filling and emptying

A loading platform makes it easier to access the hopper and, as an option, additional steps can be folded out on either side of the larger capacity AMICO F hopper. This makes filling easier.

A large pressure-tight fitting is provided for emptying residual material.

Calibration made simple

The metering units are easily accessible from the front, so the metering wheels can be changed quickly, and there is a shut-off plate to make it even easier when the hopper is full.

The calibration button mounted on the hopper frame allows the calibration test to be carried out conveniently from the ground.

Optional calibration terminal

The optional terminal with assigned function keys and a 4.3" colour touch display is mounted in the protected area on the left-hand side of the machine. Several machine functions can be carried out using the external control terminal.

• The terminal is able to perform the complete calibration process.

• Seed allocation and the relevant settings, such as application rate, recommended metering wheel, etc., can be organised using the seed library.

• From the start screen, the work area lighting and hopper lights can be switched on and off

• When the fan is active, the delay time can be determined using the calibration button

The AMICO F hopper is equipped with ISOBUS as standard to ensure convenient operation. This means that front hopper can be controlled using our EXPERT 75 and CCI 1200 terminals, or using any ISOBUS compatible tractor terminal. This level of intuitive operation makes your work much easier.

Because the hopper can be controlled independently using ISOBUS, it can be easily teamed up with attachments from other manufacturers.