Long mouldboards


27 Wc DURASTAR

Low drag resistance, well suited to working on slopes. Ideal for ploughing meadow and flat land with good furrow clearance. Suitable for higher forward speeds.

  • Working width up to 45 cm

  • Working depth up to 25 cm

  • Furrow clearance up to 48 cm


36 W

Long, curved mould board for heavy, sticky soil. Suitable for moderate operating speeds.

  • Working width up to 45 cm

  • Working depth up to 25 cm

  • Furrow clearance up to 40 cm


41 W

Long, curved mould board for heavy, sticky soil. Suitable for moderate operating speeds.

  • Working width up to 45 cm

  • Working depth up to 30 cm

  • Furrow clearance up to 45 cm


46 Wc DURASTAR

Carburised mouldboards with highly wear-resistant surfaces for maximum service life. Good tilth and suitable for slopes, low draft in loam and clay soils, also light soil types. A body for high working speeds without overlapping. Wide furrow clearance, low draft and excellent turning of the furrow ridge are the hallmarks of this mouldboard.

  • Working width up to 54 cm

  • Working depth up to 35 cm

  • Furrow clearance up to 53 cm


46 Wd

The through-hardened mouldboards are hard and tough across the whole cross-section Good tilth and suitable for slopes, low draft in loam and clay soils, also light soil types. A body for high working speeds without overlapping. Wide furrow clearance, low draft and excellent turning of the furrow ridge are the hallmarks of this mouldboard.

  • Working width up to 54 cm

  • Working depth up to 35 cm

  • Furrow clearance up to 53 cm

Universal body


36 UWc DURASTAR

Universal mouldboard with very good furrow clearance and excellent tilth at normal working speed. Large quantities of harvest residues are ploughed in tidily. A low-draft mouldboard, suitable for most soils.

  • Working width up to 50 cm

  • Working depth up to 30 cm

  • Furrow clearance up to 48 cm


39 UWc DURASTAR

Large universal mouldboard with very good furrow clearance and excellent tilth at normal working speed. Large quantities of harvest residues are ploughed in tidily. A low-draft mouldboard, suitable for most soils.

  • Working width up to 54 cm

  • Working depth up to 35 cm

  • Furrow clearance up to 50 cm

Slatted mouldboards


35 WSS DURASTAR

Slatted mouldboards with strong turning characteristics, specially suitable for peaty, medium-density and sticky soil. Especially wide furrow clearing and excellent tilth.

  • Working width up to 54 cm

  • Working depth up to 35 cm

  • Furrow clearance up to 53 cm


38 WSS DURASTAR

Low-drag resistance body with curved slats for excellent crumbling effect in medium to heavy soils (loam, clay). Good furrow clearance - ideal for wide tyres.

  • Working width up to 54 cm

  • Working depth up to 30 cm

  • Furrow clearance up to 50 cm

Synthetic mouldboard


50 RW

Material Robalon S, 15 mm thick, metal shin, geometry and frog same as the 46 W. Long, curved, high synthetic mouldboard for soils with low stability. Provides wide furrow clearing and soil flows easily along surface. The 50 RW body is to be used only with a combined share and point and is not suitable for stony areas.

  • Working width up to 54 cm

  • Working depth up to 35 cm

  • Furrow clearance up to 53 cm