Good soil penetration especially on very hard soils
The shallow alignment of the point enables minimal difference in angle compared to the wings, which remains the same even if the point is worn
A working depth of 5 cm to 30 cm is achievable
Consistent tillage performance
Tines are mounted with two bolts
Thanks to the double mounting there is no risk of losing the point even in really tough soil conditions
15 mm material thickness at share point
Increased material thickness in the area subject to most wear
4 times the durability compared to standard points
High quality coating on the front side of the point
High tungsten-carbide content for longer service life
Resistant to wear even in stony conditions
Special point shape with higher volume in the area subject to most wear
High quality steel that retains the shape of the tool
Coating even withstands stone impact
Scale shape reduces friction wear. Soil-to-soil contact that protects the point and reduces smear marks.
High quality steel, the point and lower edge is completely encased with tungsten carbide. The point always sharpens itself.
Much longer service life and higher resistance to fracture for reliable operation
Up to eight times more durable resulting in saving costs and time
Improved penetration, lower power required thanks to optimised leading edge
Optimum loosening and mixing through of soil
Scale shape reduces friction wear. Soil-to-soil contact that protects the point and reduces smear marks.
Coated on the underside of the share
Double the durability compared to standard share
Much higher wear resistance thanks to high quality steel that retains tine shape
Coating even withstands stone impact
Tungsten carbide plates along the shin of the wing
4 times the durability compared to standard wings
40 mm wide without shin
Reliable soil penetration and long service life thanks to tungsten carbide tip
Intensive loosening up to 30 cm deep
Effective breaking up of harmful compaction
Promotion of soil rooting
The two gang SYNKRO stubble cultivators are equipped as standard with split chisel points (CLASSIC) and wide wing shares.
It's your choice:
CLASSIC point + shin + wing = standard
CLASSIC point + shin on its own
DURASTAR point + shin on its own
DURASTAR point + shin + wing
DURASTAR point + shin + DURASTAR wing
DURASTAR point + shin + DURASTAR PLUS wing
DURASTAR PLUS point + wing on its own
DURASTAR PLUS point + shin + wing
DURASTAR PLUS point + shin + DURASTAR wing
DURASTAR PLUS point + shin + DURASTAR PLUS wing
DURASTAR narrow point