The driveline is designed for high outputs. TORRO loader wagons are designed for tractors of up to 300 hp.
These new models are driven by a PTO shaft with a wide angled joint and a cam-type clutch to protect the driveline. The large-dimensioned oil filled rotor side drive gearbox is completely maintenance-free.
The bearing is located on the rotor support frame between the rotor and transmission to protect the bearings and transmission.
The driveline is protected to an impressive torque of 2300 Nm, corresponding to a peak performance of 221 kW / 300 hp.
This represents an increase in performance of 10%.
ISOBUS control
A load cell on the rotor gearbox measures the drive torque and can be precisely adjusted to the type of crop. During loading, the torque sensor on the gearbox together with sensors in the front panel and the automatic loading flap control the scraper floor to deliver complete forage protection without leaving the tractor seat.
Load sensing
All PÖTTINGER loader wagons are load-sensing compatible. The required oil flowrate is precisely measured and adjusted to demand. This prevents the oil from heating up and reduces the power requirement by up to 20 hp (15 kW).
The driveline to the beater rotors is concealed within the frame. The high-strength drive shaft is protected by a cam-type clutch set at 1700 Nm.