1 Mounting
Cat. III and Cat. IV double sided linkage lugs for the lower linkage guarantees high strength. These ensure that power is transmitted efficiently from the tractor to the plough.
Turning angle of over 90 degrees possible
2 TRACTION CONTROL
The weight transferred to the rear axle of the tractor by the hydraulic cylinder increases traction and reduces slippage. Increased traction is essential for cost effective operation because it saves time and money.
Up to 1,100 kg more ballast
3 Turnover mechanism
Two telescopic hydraulic cylinders turnover the plough reliably and smoothly at the headland. These are mechanically locked during road transport. Easily adjustable, rugged stops ensure precise beam angle adjustment.
4 PLUS
The furrow width can easily be adjusted from the tractor seat. The furrow width does not affect the width of the front plough body.
Working widths of 35 cm to 58 cm on each plough body
5 Front furrow width
The working width of the front body can be adjusted either mechanically by using spindle, or hydraulically as an option. If the furrow width is changed using the PLUS system, the front furrow width is automatically adjusted as well.
Large setting range for tractor inside track width from 1,000 mm to 1,500 mm
6 Intelligent design
The pushed frame system is aligned with the forces acting on it so that they are optimally transmitted. With the optional On-Land system, driving with the tractor outside the furrow is also possible for improved soil conservation.
Ploughing along field boundaries is no problem
Smooth road transport
7 Depth transport wheel
During the turning process, the wheel steers passively to reduce the turning radius. Easily accessible swing clips are used to adjust the depth.
Dimension 500/45-22.5
8 NOVA stone protection
The triggering pressure can be infinitely variable adjusted using a single-acting spool valve. This design saves weight and space.
Maximum triggering pressure 1,700 kg
The pressure increases as the leg moves up for rapid soil re-entry
Trip clearance 48 cm