Videos
Brochures
Suffolk coulters, single-disc coulters and DUAL DISC double-disc coulters are available for planting cereals. PCS integrates precision seed drilling technology into a pneumatic seed drill, making you independent from single seed drills. This means greater flexibility and more cost efficient operation.
Suffolk coulters, single-disc coulters and DUAL DISC double-disc coulters are available for planting cereals. PCS integrates precision seed drilling technology into a pneumatic seed drill, making you independent from single seed drills. This means greater flexibility and more cost efficient operation.
Customer benefits
Best seed germination
Best seed germination
IDS - flexibility that pays dividends
The unique IDS system (Intelligent Distribution System) controls all outlets via the bus system. This opens up completely new capabilities in coulter pipe and tramline switching. A must-have for contract work and machinery rings.
It is easy to set the tramlines at the terminal - no need to change the hoses.
The intelligent heart of the system
1 The riser tube with funnel-shaped outside conveys the seed material through the distributor head to the outlets.
2 The controlled flaps feed the seed through the patented funnel system into the air stream and back to the riser tube.
With active tramline switching the seed rate is automatically reduced for a seed saving of up to 6 %.
Settings
The IDS distributor head ensures uniform crop growth by maintaining a completely consistent seed count in all coulter pipes.
Tramline widths
Track widths
Special tramline switching
Dual tramline systems
Half width switching left and right
Tramline rhythm can be selected independently of the seed drill width
Reliable & convenient: Tramline switching
Tramline switching is performed electronically using actuator motors. Straighforward setting and monitoring functions using the terminal.
Tramline switching can be symmetrical, asymmetrical or custom.
Flaps on the distributor return the seed to the riser tube so that overall seed output by the metering system is reduced.
Thanks to the free choice of track widths, tramline widths and tramline rhythms, the AEROSEM is perfectly suited for contract work.
Half-width and section control
With the fully equipped version of the distributor head, in addition to manual half-width switching, metre-by-metre automatic part width section control is also possible on the rigid AEROSEM models.
Half width switching for symmetrical tramlines - AEROSEM 3002 ADD at 24 m
Half width switching is engaged simply by pressing a key
Convenient to use
Convenient to use
Metering with the highest precision
The AEROSEM metering system is designed for the highest possible precision and ensures that exactly the right flow rate of any given seed type is used, even in the most difficult operating conditions.
An outlet flap provides an additional level of fine adjustment depending on the size of the seed.
The metering wheel motor has a wide speed range, so that no gears have to be preselected and site-specific sowing is no problem.
Smooth distribution
A high volume of air and low air velocity protect the seed and any dressing against damage. Special distributor head inserts allow sowing in different row widths: this protects the seed against cracking and ensures reliable germination. The interaction of the precision metering system and the large distributor head results in uniform, highly precise and flexible seed placement. This combination ensures maximum effectiveness of seed and dressing.
Precise and uniform due to lateral distribution
The seed is fed uniformly to the distributor in an air stream that passes up the high riser tube. The large diameter of the distributor head guarantees precise lateral distribution of the seed and is optimised in the factory.
It has never been so easy
The calibration system is fitted with a practical catchment tray that is easy to use and saves time.
With the mechanical metering system, calibration is carried out using a hand crank. In addition, a freewheel is provided in the driveline and the gearbox revolutions are displayed on the control terminal.
Calibration with the electric metering system is carried out either at the press of a button directly on the machine or by pressing a key on the control terminal.
Practical catchment tray, which is always on-board.
The calibration flap is monitored by a sensor, so that no operator errors can occur during calibration or during operation.
Seed flow sensors for convenience and reliability
The optional seed flow sensors display constant and reliable feedback on the current seed flow at the control terminal.
One sensor per coulter pipe is located directly behind the IDS distributor head, to ensures reliable application. The sensitivity of the sensor can be set in three stages depending on the seed. If flow stops then the relevant coulter pipe number is displayed on the control terminal. Furthermore, red and green LEDs indicate the status directly on the sensors.
Coulter competence for high output
Coulter competence for high output
1 Coulter pressure adjustment with indicator scale
2 Coulter constant pressure system for equal pressure on the front and rear coulters
3 Precise seed slot with exact depth control
Successful sowing is dependent on perfectly-matched coulters for opening the seed slot, uniform seed placement and covering the seed again. A well-formed seed slot is essential for successful drilling.
PÖTTINGER provides you with exactly the right coulters for your needs - our single disc or double disc coulters guarantee optimum seed placement and uniform emergence.
Single-disc coulters
These dished single-disc coulters are mounted on twin-race tapered bearings with special seals. The adjustable, rotating scrapers are located behind to provide plenty of clearance to the side - easily handles large clods.
Same coulter pressure on front and rear up to 25 kg
Precise depth tracking for a perfect seed slot
Ideal seed placement for perfect growth
Blockage-free drilling thanks to 30 cm coulter spacing
Wear-resistant cast coulter points
DUAL DISC coulters
The DUAL DISC double disc coulter system ensures precise seed placement even in the most difficult conditions.
The large coulters are slightly offset and form a clean and tidy seed slot. The maintenance-free, equal length coulter arms with ab offset of 30 cm ensure maximum reliability even with a high level of plant residues. With up to 50 kilograms applied to each seed coulter, reliable operation is guaranteed even at high travel speeds The V-shaped seed slot prevents the seed from rolling.
Your advantages
Best clearance thanks to 30 cm coulter offset
Reliable operation in mulch drilling conditions thanks to 350 mm diameter disc coulters and off-set position
Consistent coulter pressure because coulter arms are all the same length
Optimum plant distribution density with a row spacing of 12.5 cm
Optimum depth control thanks to large dimensioned press wheels
Reliable operation in the most difficult conditions thanks to integrated hardened scrapers on the shares
Central coulter pressure adjustment
Central depth adjustment control
PCS – PRECISION COMBI SEEDING
PCS – PRECISION COMBI SEEDING
1 AEROSEM A / AEROSEM ADD
Wheat, barley, oats, rye spelt, sunflower seeds, beans, peas oil seed rape, poppy seeds, phacelia, mustard
2 AEROSEM PCS
Maize, row spacing 75 cm optional simultaneous fertiliser application of 1 or 2 bands or simultaneous application of companion crop seed between the maize
3 AEROSEM PCS DUPLEX SEED
Maize, row spacing 75 cm / 12.5 cm optional fertiliser application with a band next to each row or simultaneous application of companion crop seed between the maize
4 AEROSEM PC
Maize, row spacing 37.5 cm optional fertiliser application with a band next to each row
All-in-one for pure flexibility
The PCS (Precision Combi Seeding) option integrates precision seed drill technology into a rigid pneumatic seed drill, this allows you to operate independently of dedicated precision seed drill. This means greater flexibility and a more cost effective operation when using your AEROSEM ADD seed drill.
Precision maize drilling
One seed drill for multiple tasks:
Cereals
Maize / maize with fertiliser / maize with companion crop
Fertiliser applied directly to the maize row
Exact seed separation
The single-seed precision metering elements are located beneath the seed hopper. This hydraulically-driven system ensures exact mechanical separation of the seed. The air stream transports the seed to the coulters, during this time an optical sensor monitors the distribution of the seed in the row. This monitoring system allows for:
Easy adjustment of seeds per m22
Precise monitoring of seed distribution in the seed slot
Pneumatic seed transport
An air flap divides the air stream between the standard metering system and the PCS. Under pressure, the air system injector takes the individual seeds from the seed elevator and transports them at precise intervals to the coulter.
A seed flow sensor monitors reliable seed transport and indicates to the driver the accuracy of seed distribution in the seed slot.
Perfectly placed
The DUAL DISC coulter with its integrated seed slot former ensures a perfect seed slot. A stopper roller presses the seed into the furrow. A press wheel controls consolidation and working depth. The seed placement depth can be adjusted centrally.
No vertical drop
Exact seed placement
Seed does not roll along slot
Optimum covering of seed
Uniform seed germination
DUPLEX SEED – sowing maize in double rows
With 12.5 cm spacing in the double row, and 75 cm spacing between the double rows
The double spacing in the row ensures a better plant distribution density of the maize plants
Increase in yield of up to 5.5 % possible with silage maize and corn maize
Maize sown at 37.5 cm
Optimum plant distribution density of all maize plants thanks to shorter spacing in the seed slot
Optional tramline switching means that crop care access is no problem even with small row spacing
AEROSEM | 3002 A / ADD | 3502 A / ADD | 4002 A / ADD |
Working width | 3.0 m | 3.5 m | 4.0 m |
Number of rows | 24 / 20 | 28 | 32 / 26 |
Row spacing | 12.5 / 15 cm | 12.5 cm | 12.5 / 15 cm |
AEROSEM PCS | 3002 ADD | 3502 ADD | 4002 ADD |
Working width | 3.0 m | 3.5 m | 4.0 m |
Number of cereals rows 12.5 cm | 24 | 28 | 32 |
Number of maize rows 75 cm | 4 | 5 | 5 |
Number of maize rows DUPLEX SEED | 8 | 10 | 10 |
Number of maize rows 37.5 cm | 8 | 9 | 10 |
Technology
High volume seed hopper
High volume seed hopper
The AEROSEM seed hopper features a large opening for filling. This enables rapid and trouble-free filling using Big-Bags or a front loader bucket. A wide bag support with handrail on top of the hopper makes it easier to fill by hand. The robust roller tarpaulin cover is dustproof and rainproof, rolls up automatically and can be closed again easily. With an optional hopper extension the seed hopper can be expanded to hold 1,850 litres on all rigid AEROSEM seed drills.
One hopper for all jobs
One hopper for all jobs
The seed hopper is simply divided for single-seed drilling using PCS and demand-specific fertilisation. The partition walls are repositioned quickly and easily using wing-nuts without the need for tools.
1 Partition setting for sowing cereals only
2 Partition setting to divide the tank for maize seed and fertiliser
The standard version of the hopper can hold 450 litres of maize (2 x 225 l) and 800 litres of fertiliser. With the seed hopper extension there is space for 650 litres of maize (2 x 325 l) and 1,200 litres of fertiliser.
The standard metering system allows fertiliser to be applied on both sides of each seed row.
Instead of row fertilisation, for example, a grass companion crop can also be sown for improved erosion control.
It is possible to change the metering wheel even when the seed hopper is full thanks to a shut-off plate above the metering wheel.
Unique coupling
Unique coupling
The compact design is possible thanks to the smallest gap between the coulter rail and power harrow roller.
1 Mounted on a power harrow or compact combination, the centre of gravity is placed far forward.
2 The AEROSEM is mounted on the rear roller and is guided by a top link. The weight of the seed drill is carried by the rear roller.
3 The roller and seed drill form a compact unit and enable parallel guidance of the machine. This means that when the working depth of the power harrow is changed it does not influence the seed placement depth of the coulters.
It couldn't be more straightforward
From filling the seed hopper and calibration through to emptying residual seed from the tank, all adjustments can be made on the left-hand side or rear of the machine. The adjustment controls are easily accessible and positioned ergonomically. Easy adjustment with everything close at hand saves time.
Simple metering wheel selection via PÖTSEM App and terminal
Convenient access to the seed hopper using the loading platform on the left side of the machine
Mounting – a perfect connection
Mounting – a perfect connection
Mounting and removing the drill using the rear roller is quick and easy, without the need for tools.
Parking standards are provided for convenient handling.
Simply drive the power harrow under the AEROSEM. This is then piggybacked when lifted and just needs to be secured in place.
Two lugs on each side and the top link ensure secure attachment.
Depth adjustment
Depth adjustment
On the single disc coulters, the depth is adjusted using optional depth control wheels with a diameter of 250 mm. The depth can be easily adjusted on each row by means of a pin. The hook solution makes it easy to remove the press wheels without the need for tools.
With the DUAL DISC coulter system, the depth is adjusted for the entire machine centrally using two turnbuckles. The press wheels have a diameter of 330 mm.
Central coulter pressure adjustment
Central coulter pressure adjustment
The coulter pressure on all coulter systems is adjusted simply by using the ratchet wrench supplied.
Thanks to precise tension spring matching, the single disc coulter system ensures the same pressure is applied to the front and rear coulters.
The DUAL DISC double disc coulter system is pre-tensioned by the maintenance-free rubber elements and has coulter arms of the same length.
Optional hydraulic coulter pressure adjustment is available for both coulter systems
Press wheels for uniform placement depth
Press wheels for uniform placement depth
The optionally available press wheels guarantee an exact placement depth for the single disc coulter. Press wheels are standard on the DUAL DISC double disc coulter system. These can be set in three different positions for seed placement depths of up to 6 centimetres.
Each of the disc coulters is guided by a press wheel to ensure a precise and uniform seed placement depth.
In addition to depth control, the press wheels also ensure controlled consolidation of the soil and pressure on the seed.
Straightforward depth adjustment using lock pins or turnbuckles
Reliable operation thanks to large dimensioned press wheels
Levelling tines
Levelling tines
The strong harrow tines feature spiral springs for perfect results. Shocks are absorbed using maintenance-free rubber mountings. damage is prevented if the machine is reversed inadvertently.
Central tine angle adjustment
Easy to use adjustment functions for depth and pressure
Outer tines can be retracted for a transport width of 3 or 4 metres
Can be used together with press wheels without additional adapters.
Standard single-row harrow tine
The tines are located between the seed rows. These tines are arch-shaped to prevent clogging even in heavy organic material. The edging tine pairs are slanted inwards for a seamless pass-on-pass finish.
'Perfekt' single-row harrow tine
'Perfekt' harrow tines are designed for an especially intensive levelling effect. Offset tine lengths smooth the surface over completely to ensure that seeds are definitely covered even when shallow-drilling. The result is uniform germination of every seed.
Single-disc coulters | DUAL DISC coulters | |
Coulter configuration | 2 row | 2 row |
Coulter offset | 30 cm | 30 cm |
Row spacing | 12.5 cm / 15 cm | 12.5 cm / 15 cm |
Number of coulters AEROSEM 3002 | 24 / 20 | 24 / 20 |
Number of coulters AEROSEM 3502 | 28 | 28 |
Number of coulters AEROSEM 4002 | 32 / 26 | 32 / 26 |
Number of coulters AEROSEM 4002 FDD | - | 32 |
Number of coulters AEROSEM 5002 FDD | - | 40 |
Coulter disc diameter | 320 mm | 350 mm |
Depth roller diameter | 250 x 40 mm | 330 x 50 mm |
Pressure per coulter | up to 25 kg | up to 50 kg |
Our input - your output.
Our input - your output.
Competence in the digital field makes your daily work easier
At PÖTTINGER, we offer you numerous possibilities in the field of digital agricultural technology that make your everyday work easier so that you can operate more efficiently and conveniently.
For years, our customers have benefited from intelligent control terminals and precision farming solutions for soil and seed, grassland and harvesting technology. Together with PÖTTINGER, being a modern, networked company becomes reality.
Ultimately, it's all about making your job easier and enjoying cost effective benefits through the use of intelligent technologies. This means more convenience, time and profit.
AEROSEM - electric metering and control functions
Pre-metering
Electrical calibration sequence
Infinitely adjustable seed flowrate adjustment
Hopper level measurement
Fan and metering shaft monitoring
Seed library
Seed flow sensors (optional)
SEED COMPLETE – Precision Farming
With SEED COMPLETE, PÖTTINGER offers a tool for your success by optimising the management of your farming operations.
Here, the seed rate can be automatically adapted to match the soil conditions in each field using application maps that you can prepare on the office PC before heading out. To ensure traceability at a later date, the data can be archived for comparison over the long term on the office PC.
The variable seed rate is yet another way of optimising yield.
The actual quantities and areas processed in the field can be transmitted back to the PC in your office at any time.
Getting the most out of your yield potential
GPS data can be used to start and stop the metering system to avoid seed windows and overlapping.
Differences in the soil and growth rate within a field can be taken into account during drilling. Simply select the site-specific quantity of seeds per square metre 2 to get the best yield.
Precision application of seed, fertiliser and spray leads to savings of up to 5 % on variable costs or up to € 50 per hectare.
agrirouter and NEXT Machine Management
PÖTTINGER is a member of the agrirouter programme along with many other agricultural machinery manufacturers. agrirouter serves as a manufacturer-independent data exchange platform between the farmer, machine and farm software.
NEXT Machine Management networks your PÖTTINGER machinery intelligently with the rest of your fleet. Job files, machine data and application maps, etc. can now be sent easily using the agrirouter directly between the machine and the farm management software. This reduces your daily admin workload.
Intelligent control
Intelligent control
COMPASS
The COMPASS CONTROL operator terminal controls and monitors the functions on mechanical AEROSEM seed drills.
Control unit with multiple-line display and lighting
The keys are raised and backlit
High quality two-component casing with display and status indicator
Calibration assistant with suggested gearing values
Speed indicator
Mechanical current and total hectare counter
Operating electronic seed flow-rate control system
Electronic tramline switching
POWER CONTROL – Electronic control system
With the POWER CONTROL terminal you can operate all ISOBUS-compatible PÖTTINGER machines. The functions are performed directly at the push of a button without pre-selection or an additional spool valve.
The most important keys are labelled directly with the machine-specific functions, which helps drivers regardless of whether they have used the machine before or not.
The function keys F1 to F4 can be used to operate additional equipment on your machine.
The colour display provides at-a-glance information on functions and the operating status of the machine.
Speed signal from a radar sensor or tractor signal from ISOBUS
Operating with PCS - Precision Combi Seeding
Enter row spacing and seed/ha or inter plant distance in seed row
Menu guidance for calibration, tramlines and seed flowrate
Pre-metering
Metering - Start/Stop
Tramline switching: Any rhythm can be selected
Automatic seed flow reduction for tramlines and optional left-side switching
Electrical calibration sequence
Seed flow adjustment and seed library
EXPERT 75 ISOBUS terminal
The PÖTTINGER EXPERT 75 ISOBUS terminal offers high flexibility and enables professional operation of all ISOBUS-compatible machines, regardless of brand.
The newly designed terminal has been expanded upwards in terms of ergonomics and intuitiveness and offers a multitude of advantages.
High quality 5.6" TFT colour touchscreen
Rugged, stylish synthetic casing
Convenient single-hand operation, grip bar for secure hold.
Double-row arrangement of command keys on the right
Straightforward and intuitive user interface
Edit using keys and touch-screen
Scroll wheel with confirmation function for direct input and adjustment of set points
Compact size - does not obstruct field of vision
Ambient light sensor and back-lit function keys
CCI 1200 ISOBUS terminal
In addition to the features offered by the POWER CONTROL terminal, this system also enables the control of all ISOBUS machines in your fleet, regardless of manufacturer.
High quality 12" TFT colour touchscreen.
Straightforward and intuitive user interface
Horizontal or vertical mounting possible
Large display for best possible monitoring of machine functions
Individual layout
Function pre-select
Seed library
Complete supervision of machinery
Partial width switchable using Multi Boom
Simultaneous display of multiple applications
Camera image and machine functions at a glance
Simultaneous operation of several ISOBUS machines possible
Technical data
| AEROSEM 3002 ADD | AEROSEM 3502 ADD | AEROSEM 4002 ADD | |||
|---|---|---|---|---|---|
| Working width | 3 m | 3,5 m | 4 m | ||
| Transport width | 3 m | 3,5 m | 4 m | ||
| Filling height seed hopper | 196 cm | 196 cm | 196 cm | ||
| Number of rows | 20 24 pcs. | 28 pcs. | 26 32 pcs. | ||
| Row spacing | 15 12,5 cm | 12,5 cm | 15 12,5 cm | ||
| Coulter pressure (Maximum) | 50 kg | 50 kg | 50 kg | ||
| Coulter spacing (Front to rear) | 30 cm | 30 cm | 30 cm | ||
| Seed hopper volume | 1250 l | 1250 l | 1250 l | ||
| Min. oil flow req. for fan | 35 l | 35 l | 35 l | ||
| Oil flowrate for PCS drive | 25 l | 25 l | 25 l | ||
| Weight with DualDisc | 1275 kg | 1430 kg | 1612 kg |
AEROSEM 3002 ADD
| AEROSEM 3002 ADD | |
|---|---|
| Working width | 3 m |
| Transport width | 3 m |
| Filling height seed hopper | 196 cm |
| Number of rows | 20 24 pcs. |
| Row spacing | 15 12,5 cm |
| Coulter pressure (Maximum) | 50 kg |
| Coulter spacing (Front to rear) | 30 cm |
| Seed hopper volume | 1250 l |
| Min. oil flow req. for fan | 35 l |
| Oil flowrate for PCS drive | 25 l |
| Weight with DualDisc | 1275 kg |
AEROSEM 3502 ADD
| AEROSEM 3502 ADD | |
|---|---|
| Working width | 3,5 m |
| Transport width | 3,5 m |
| Filling height seed hopper | 196 cm |
| Number of rows | 28 pcs. |
| Row spacing | 12,5 cm |
| Coulter pressure (Maximum) | 50 kg |
| Coulter spacing (Front to rear) | 30 cm |
| Seed hopper volume | 1250 l |
| Min. oil flow req. for fan | 35 l |
| Oil flowrate for PCS drive | 25 l |
| Weight with DualDisc | 1430 kg |
AEROSEM 4002 ADD
| AEROSEM 4002 ADD | |
|---|---|
| Working width | 4 m |
| Transport width | 4 m |
| Filling height seed hopper | 196 cm |
| Number of rows | 26 32 pcs. |
| Row spacing | 15 12,5 cm |
| Coulter pressure (Maximum) | 50 kg |
| Coulter spacing (Front to rear) | 30 cm |
| Seed hopper volume | 1250 l |
| Min. oil flow req. for fan | 35 l |
| Oil flowrate for PCS drive | 25 l |
| Weight with DualDisc | 1612 kg |
| AEROSEM 3002 A | AEROSEM 3502 A | AEROSEM 4002 A | |||
|---|---|---|---|---|---|
| Working width | 3 m | 3,5 m | 4 m | ||
| Transport width | 3 m | 3,5 m | 4 m | ||
| Filling height seed hopper | 196 cm | 196 cm | 196 cm | ||
| Number of rows | 20 24 pcs. | 28 pcs. | 26 32 pcs. | ||
| Row spacing | 15 12,5 cm | 12,5 cm | 15 12,5 cm | ||
| Coulter pressure (Maximum) | 25 kg | 25 kg | 25 kg | ||
| Coulter spacing Single disc coulter | 30 cm | 30 cm | 30 cm | ||
| Seed hopper volume | 1250 l | 1250 l | 1250 l | ||
| Min. oil flow req. for fan | 35 l | 35 l | 35 l | ||
| Weight with disc shares | 1082 kg | 1239 kg | 1332 kg | ||
| Weight with shares | 1025 kg | 1156 kg | 1269 kg |
AEROSEM 3002 A
| AEROSEM 3002 A | |
|---|---|
| Working width | 3 m |
| Transport width | 3 m |
| Filling height seed hopper | 196 cm |
| Number of rows | 20 24 pcs. |
| Row spacing | 15 12,5 cm |
| Coulter pressure (Maximum) | 25 kg |
| Coulter spacing Single disc coulter | 30 cm |
| Seed hopper volume | 1250 l |
| Min. oil flow req. for fan | 35 l |
| Weight with disc shares | 1082 kg |
| Weight with shares | 1025 kg |
AEROSEM 3502 A
| AEROSEM 3502 A | |
|---|---|
| Working width | 3,5 m |
| Transport width | 3,5 m |
| Filling height seed hopper | 196 cm |
| Number of rows | 28 pcs. |
| Row spacing | 12,5 cm |
| Coulter pressure (Maximum) | 25 kg |
| Coulter spacing Single disc coulter | 30 cm |
| Seed hopper volume | 1250 l |
| Min. oil flow req. for fan | 35 l |
| Weight with disc shares | 1239 kg |
| Weight with shares | 1156 kg |
AEROSEM 4002 A
| AEROSEM 4002 A | |
|---|---|
| Working width | 4 m |
| Transport width | 4 m |
| Filling height seed hopper | 196 cm |
| Number of rows | 26 32 pcs. |
| Row spacing | 15 12,5 cm |
| Coulter pressure (Maximum) | 25 kg |
| Coulter spacing Single disc coulter | 30 cm |
| Seed hopper volume | 1250 l |
| Min. oil flow req. for fan | 35 l |
| Weight with disc shares | 1332 kg |
| Weight with shares | 1269 kg |
Videos
Animation PCS (Precision Combi Seeding)
Animation IDS [english]
PÖTTINGER AEROSEM Pneumatic seed drills [english]
PÖTTINGER AEROSEM DUPLEX SEED Maize seeding in twin rows
Brochures
Image gallery
Newsmessages
PÖTSEM
Choose the right metering wheel for your seed material simply by using PÖTSEM on your smartphone, tablet or PC. Get the new app from the App Store now (for iOS operating systems).
To the PÖTSEM app: https://www.poettinger.at/poetsem/#/
To the iOS app: https://itunes.apple.com/de/app/p%C3%B6tsem/id1434048370?mt=8
Quality
We manufacture our products using the very latest flexible industrial methods in several locations. Everything we do is delivered to the highest possible quality.
Here, we test our products as to their suitability in field conditions in order to pass on only the very best to our customers. The testing centre is one of the most modern in agriculture worldwide and has an excellent reputation. Many other internationally-recognised manufacturers have their products tested here.
Our customers expect our machines to operate faultlessly and be completely reliable. To achieve this, we apply the highest quality standards applicable to the manufacture of agricultural machines - our own. The whole production process is monitored by our internal quality management team.
Our coating processes involve the most environmentally-friendly painting methods. Powder-coated paintwork has proven to be flexible and durable in the field. This ensures that our machines retain their value even after years of hard service.
